Help with Symantec Gareway Security 5420 appliance
-
I have purchased this device from ebay for installing PFsense. I need some help in opening the case so that I can remove the HD for pfsense install. I poked around the screws and could not figure out which ones to remove to open the case. I do not have any screws on the sides and there just empty holes. Any help is highly appreciated.
-
Any help please ?
-
Maybe you haven't removed the screw which is under the warranty shield and cannot be seen. Remove the warrant shield and you will find it.
-
Looking at this picture:
It looks like just the top panel comes off and slides towards the back initially. I could be wrong though. ::)
Steve
-
I haven't opened that box for a couple years now but I don't recall anything special about it. I'll take a look if I get a chance next week. If you have problems getting the drive out once the case is open maybe the pics here would help:
http://blog.oliverhansen.com/index.php/2009/11/18/install-pfsense-on-symantec-5420-security-gateway/ -
Thank you all for your kind responses. By removing the screw underneath the warrantee laber I was able to open the case.
