CP stops work after upgrade to 1.2BETA-1-2007-05-11



  • After upgrade from 1.0.1-snapshot 18-01-2007 captive portal doesn't work.
    After manually restart webconfigurator from ssh it shows on termianl window:

    –------------
    Restarting webConfigurator...ipfw: getsockopt(IP_FW_GET): Protocol not available

    Warning: array_unique(): The argument should be an array in /etc/inc/captiveportal.inc on line 972

    Warning: array_diff(): Argument #2 is not an array in /etc/inc/captiveportal.inc on line 978

    Warning: array_shift(): The argument should be an array in /etc/inc/captiveportal.inc on line 979
    Error: system reached maximum login capacity, no free FW rulenos in captiveportal_allowedip_configure().
    done.

    I have 5 allowed IPs.

    Any ideas?



  • I'll look into it at some point this weekend.



  • I'm using the same release and it works for me, but I had the following issues before I rebooted the firewall.

    1. I could browse the web after I activated CP (even if I did not login), but I could not ping any IP addresses on the internet.
    2. I tried to restart CP, but the web configurator crashed right after I did that.

    My NAT (Port Forward) rules does not works with "Pass-Through MAC" enabled.

    Edit: I think I fixed my problem with NAT by adding a rule in the allowed IP addresses tab. You obviously need to configure both "Pass-Through MAC" and "Allowed IP addresses" if you use NAT with Captive Portal.



  • I came across with similar problem too, I was using my own version of CP login page on 1.0.1-snapshot without problem. After I updated to 1.2Beta-1, my page couldn't show up properly, all the image files from file manager couldn't be displayed.



  • I can confirm CP is broken in latest beta.



  • Do you mean 1.2-BETA-1-TESTING-SNAPSHOT-05-14-2007? I'm asking because the other members are talking about an older Beta/Snapshot. Captive Portal in pfSense 1.2Beta-1 works for me, and I don't feel to test the snapshot from 05-14-2007 if it's confirmed to be broken.



  • I just installed todays snapshot May-25-2007 and i see that CP is broken:

    1. File manager does not upload images (I placed images mannualy to CP main dir and they work ==> something wrong with upload procedure)
    2. Redirect page does not redirect for some reason

    Thats it for now, I hope this gonna be fixed soon

    UPDATE [May 29]: All fine on todays snap, also curently installed 1.2beta and all good there


Log in to reply