RRD traffic graphics for interfaces LAN and OPT1 are blank :(

[giorgiolago]

Hello people, I have a sense pf trablhando as IDS / BRIDGE interfaces between LAN and OPT1 bridge0 forming the interface, the problem is that the dash board I can acompar traffic in real-time LAN and OPT1, but in RRD graphs blank.
Another problem is that the RRD generates graphical interface for adding bridge all traffic upload / download by passing members of the bridge. Example: if the download is 20 Mbits and 10Mbits Upload the graph of the bridge signals 30Mbits (20 +10) is this normal?

I try reset settings for RRD toll on webinterface and enable/disable rrddata in webinterface too, but not sucess…

[2.0.1-RELEASE][root@pfsense.localdomain]/root(53): ls -alh /var/db/rrd/
total 3226
drwxr-xr-x  2 nobody  wheel  512B May 31 10:49 .
drwxr-xr-x  11 root    wheel  1.0K May 25 13:36 ..
-rw-r–r--  1 nobody  wheel    47K May 31 11:48 WAN-quality.rrd
-rw-r--r--  1 nobody  wheel  190K May 31 11:48 ipsec-packets.rrd
-rw-r--r--  1 nobody  wheel  190K May 31 11:48 ipsec-traffic.rrd
-rw-r--r--  1 nobody  wheel  190K May 31 11:48 lan-packets.rrd
-rw-r--r--  1 nobody  wheel  190K May 31 11:48 lan-traffic.rrd
-rw-r--r--  1 nobody  wheel  190K May 31 11:48 opt1-packets.rrd
-rw-r--r--  1 nobody  wheel  190K May 31 11:48 opt1-traffic.rrd
-rw-r--r--  1 nobody  wheel  190K May 31 11:48 opt2-packets.rrd
-rw-r--r--  1 nobody  wheel  190K May 31 11:48 opt2-traffic.rrd
-rw-r--r--  1 nobody  wheel  711K May 31 11:48 system-memory.rrd
-rw-r--r--  1 nobody  wheel  238K May 31 11:48 system-processor.rrd
-rw-r--r--  1 nobody  wheel  238K May 31 11:48 system-states.rrd
-rw-r--r--  1 nobody  wheel  4.9K May 31 10:46 updaterrd.sh
-rw-r--r--  1 nobody  wheel  190K May 31 11:48 wan-packets.rrd
-rw-r--r--  1 nobody  wheel  190K May 31 11:48 wan-traffic.rrd

[giorgiolago]

Look that pics:

[valshare]

Hi giorgiolago,

Looks you have the same problem like me:

http://forum.pfsense.org/index.php/topic,49649.0.html

no need to open a second topic  ;)

valle

[giorgiolago]

same problem, and I think we will be no solution … I am about to give up pfsense, many bugs and little or no support from the community: (

[Nachtfalke]

I hat the problem with the empty RRD graph, too.

You need to go to: SYSTEM -> Routing -> Gateways.
Just click on the little "e" icon to edit a gateway. then no need to change anything, just click save.

This should solve your problem.

[cmb]

The RRD traffic graphs are generated from PF counters. If you're not filtering on bridge member interfaces, rather only the bridge itself, the graphs of the member interfaces will be blank because there is no data for them.