Navigation

    Netgate Discussion Forum
    • Register
    • Login
    • Search
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search

    Marvell 88W8363

    Development
    1
    2
    1935
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • F
      freebee last edited by

      Hi,

      I'm trying to use the Marvell 88W8363 in ng mode in pfsense 2.1.
      The ifconfig shows everything ok:

      mwl0_wlan0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
              ether 00:01:36:1d:46:a3
              inet6 fe80::201:36ff:fe1d:46a3%mwl0_wlan0 prefixlen 64 scopeid 0xb
              inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
              nd6 options=1 <performnud>media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>status: running
              ssid F1100 channel 9 (2452 MHz 11g ht/40-) bssid 00:01:36:1d:46:a3
              regdomain FCC country BR indoor authmode WPA2/802.11i privacy MIXED
              deftxkey 3 AES-CCM 2:128-bit AES-CCM 3:128-bit txpower 14 scanvalid 60
              protmode OFF -ampdu ampdulimit 64k ampdudensity 4 shortgi smps burst
              -apbridge dtimperiod 1

      But when i try to connect, give me the error of wrong password.
      In /var/log/wireless.log have this messages:

      Jun  1 21:37:33 pfSense hostapd: mwl0_wlan0: STA 00:26:08:e2:e0:14 WPA: start authentication
      Jun  1 21:37:33 pfSense hostapd: mwl0_wlan0: STA 00:26:08:e2:e0:14 IEEE 802.1X: unauthorizing port
      Jun  1 21:37:33 pfSense hostapd: mwl0_wlan0: STA 00:26:08:e2:e0:14 WPA: sending 1/4 msg of 4-Way Ha
      ndshake
      Jun  1 21:37:33 pfSense hostapd: mwl0_wlan0: STA 00:26:08:e2:e0:14 WPA: EAPOL-Key timeout
      Jun  1 21:37:33 pfSense hostapd: mwl0_wlan0: STA 00:26:08:e2:e0:14 WPA: sending 1/4 msg of 4-Way Ha
      ndshake

      In just g mode, everything works fine.</hostap></performnud></up,broadcast,running,simplex,multicast>

      1 Reply Last reply Reply Quote 0
      • F
        freebee last edited by

        Using this like reference:
        http://lists.shmoo.com/pipermail/hostap/2005-March/009879.html

        The TKIP mode works. AES seems not compatible

        1 Reply Last reply Reply Quote 0
        • First post
          Last post