DHCPv6 Comcast Error
-
So Comcast has turned up DHCPv6 for me and it's be working with a bit of hackery.
I have to bring up the track interface after the firewall rules have loaded as it produces the following rule which errors.
" There were error(s) loading the rules: /tmp/rules.debug:209: macro 'Comcast' not defined/tmp/rules.debug:209: syntax error pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [209]: pass in quick on $Comcast inet6 from any to 2601
3a80:7:0:0:0:0/64 keep state label "Allow IPv6 in on Comcast to 26013a80:7:0:0:0:0/64" …"Version:
2.1-BETA0 (amd64)
built on Mon Jun 4 05:56:38 EDT 2012
FreeBSD 8.3-RELEASE-p2I'm happy to provide access to my installation or will retrieve anything relavent.
-
I should mention I'm using PD and have the track interface on my LAN int.
-
Can you show the top 10 lines or so of your /tmp/rules.debug.
They hold the macros and should have the Comcast macro.
A before and after would be ideal.
-
Complete rules before:
http://bin6.it/p/MzBkMjComplete rules after:
http://bin6.it/p/OGU5YzRules it adds that appear to throw error:
Automatic Pass rules for any delegated IPv6 prefixes through dynamic IPv6 clients
pass in quick on $LAN inet6 from 2601
3a80:7:0:0:0:0/64 to any keep state label "Allow IPv6 on LAN to any"
pass in quick on $Comcast inet6 from any to 26013a80:7:0:0:0:0/64 keep state label "Allow IPv6 in on Comcast to 26013a80:7:0:0:0:0/64" -
should be fixed, gitsync please.
-
should be fixed, gitsync please.
Sorry for the delay in this. It's fixed and working great. Thanks! ;D