Ipv6 network down

yon

pfSense-Full-Update-2.1-DEVELOPMENT-i386-20120607-1024

pfSense-Full-Update-2.1-DEVELOPMENT-i386-20120608-0024.tgz

ipv6 network can't work in lan.

ping ipv6 address get show: General failure

but Status: Dashboard show ipv6 gataway online.

rcfa

Are you testing from the pfSense box itself or from a client on the LAN?
If the latter, does it have a static IPv6 configuration?
If not, did it in fact get an IPv6 address assigned?

allpoints

:'(

http://forum.pfsense.org/index.php/topic,50221.0.html

rcfa

@allpoints:

:'(

http://forum.pfsense.org/index.php/topic,50221.0.html

Well, but that seems to only affect dynamic setups, which is why I asked the questions I asked.
You can have statically configured clients, and they work just fine (do here), unless there's another bug at play.

allpoints

@rcfa:

@allpoints:

:'(

http://forum.pfsense.org/index.php/topic,50221.0.html

Well, but that seems to only affect dynamic setups, which is why I asked the questions I asked.
You can have statically configured clients, and they work just fine (do here), unless there's another bug at play.

Just going by the build numbers he posted… ;)

yon

@rcfa:

Are you testing from the pfSense box itself or from a client on the LAN?
If the latter, does it have a static IPv6 configuration?
If not, did it in fact get an IPv6 address assigned?

I am test from any client in the LAN. ipv6 network down.

but only pfsense box show ipv6 gataway online.

I have to reback to pfSense-Full-Update-2.1-DEVELOPMENT-i386-20120605-2250. the version normal work.

jimp

If you were using policy routing rules for ipv6 (rules with a gateway set) that was broken sometime recently, but was fixed this afternoon. Wait for a new snapshot or gitsync and trigger a filter reload to see if that helps.