Build "Sun Jun 10 17:18:40 EDT 2012" killed my re0

daplumber

Upgraded to this version via Web Configurator. re0 (LAN) was then no longer working (no ping, etc) From console showed as "UP" but when attempting to "down" and then "up" got console error message about no media.

NIC is an ExpressCard 34 in a Toshiba Tecra M3 laptop, connected to a GbE switch (GbE FDX),dmesg section:

re0: <realtek 8111="" 8168="" b="" c="" cp="" d="" dp="" e="" f="" pcie="" gigabit="" ethernet="">port 0xce00-0xceff mem 0xcdfff000-0xcdffffff,0xafffc000-0xafffffff irq 17 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00000000
miibus0: <mii bus="">on re0
rgephy0: <rtl8169s 8110s="" 8211b="" media="" interface="">PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: [ITHREAD]</rtl8169s></mii></realtek>

Restored previous full backup, all copacetic again.

cmb

what was the previous working version? Unless it's so old it predates the switch to FreeBSD 8.3, drivers haven't changed since then.

daplumber

@cmb:

what was the previous working version? Unless it's so old it predates the switch to FreeBSD 8.3, drivers haven't changed since then.

Running the immediately previous build: "Current version: 2.1-BETA0 Built On: Sun Jun 10 12:16:05 EDT 2012". I thought I had implied that, sorry.

I see Monday's first build is up, so about to try that.

daplumber

Build: 2.1-BETA0 (i386) built on Mon Jun 11 03:04:57 EDT 2012

Does not exhibit the same problem.