Intel Atom BLKD945GSEJT motherboard

[CyberTiVo]

I just installed 2.0.1 on a the nanoatx Intel motherboard and get "panic: double fault" crashes.
It happens at random usually within 5 minutes of boot. I originally had BIOS version 25 and then updated to the latest (45) with the same results.  Any ideas?

[lukiwola]

@CyberTiVo:

I just installed 2.0.1 on a the nanoatx Intel motherboard and get "panic: double fault" crashes.
It happens at random usually within 5 minutes of boot. I originally had BIOS version 25 and then updated to the latest (45) with the same results.  Any ideas?

I have same problem on my Maximus II Gene P45 Chipset Board. "panic: double fault" crashes.

www.att-go.org

[wallabybob]

Have either of you tried a pfSense 2.1 snapshot build?

Which variant of 2.0.1 are you both using i386 or amd64?

[Roots0]

I have used the intel D945GSEJT 2.0.1 and 2.1 however using full installs. Not had any problems. FYI im using a 2GB EDC4000 IDE flash module: http://www.tri-m.com/products/innodisk/edc4k44.html

[CyberTiVo]

Wallabybob;

Tried both 2.0.1 and nightly 2.1.  2.0.1 gets the error listed.  2.1 panics a little differently.  Motherboard will not run 64-bit, tried that too.

Running from USB Flash drive.