Missing DHCPv6
-
Hi guys,
I've been following this guide spot on: http://doc.pfsense.org/index.php/Using_IPv6_on_2.1_with_a_Tunnel_Broker - everything looks great until I reach the point: Setup DHCPv6. I simply don't have that point in the menu.
About my installation, it's a clean install though I've loaded some configuration from my old 2.0.1 installation, I am currently on the latest snapshot and it was the same with the previous snapshot. 2.1-BETA0 (amd64) built on Wed Jun 20 12:19:46 EDT 2012.Any advice would be greatly appreciated.
pfsense: 2.1.5-RELEASE, AMD64
Running on: MB/CPU: ASUS P8H77-I / Core i3-2120T | MEM: 8GB DDR3 | HDD: WD Blue 120GB 2.5" SATA | WAN/LAN: Fujitsu D2735-2 – Intel® chip 82576NS | WLAN: Realtek® 8111F PCIe | Connection: 1000/1000Mbit (Bredband2.com)
[
/U -
There have been some renames and rearrangements since that guide was written.
The configuration settings you are looking for are under Services -> DHCPv6 Server/RA and on that page you will have two tabs DHCPv6 Server and Router Advertisements. -
The problem is mine dosn't have that either, check the screenshot.
pfsense: 2.1.5-RELEASE, AMD64
Running on: MB/CPU: ASUS P8H77-I / Core i3-2120T | MEM: 8GB DDR3 | HDD: WD Blue 120GB 2.5" SATA | WAN/LAN: Fujitsu D2735-2 – Intel® chip 82576NS | WLAN: Realtek® 8111F PCIe | Connection: 1000/1000Mbit (Bredband2.com)
[/U -
The problem is mine dosn't have that either, check the screenshot.
That looks like the widescreen package in the screen shot. See earlier posts in this forum for what to do.
Cheers
Jon -
I am so sorry for making another post about this.
Solution found in: http://forum.pfsense.org/index.php/topic,48749.0.html
Another question, will Widescreen be adapted to work at a later point?
pfsense: 2.1.5-RELEASE, AMD64
Running on: MB/CPU: ASUS P8H77-I / Core i3-2120T | MEM: 8GB DDR3 | HDD: WD Blue 120GB 2.5" SATA | WAN/LAN: Fujitsu D2735-2 – Intel® chip 82576NS | WLAN: Realtek® 8111F PCIe | Connection: 1000/1000Mbit (Bredband2.com)
[/U