Upgrading 2.0.1
-
I was running 2.0.1 and was having issues with traffic shaping rules. I was getting an error. Someone said it was fixed and I should use git to update it. Well I did and now have a non-working 2.0.2 RC. I'm willing to start over but don't want to end up with non working traffic shaping rules. Once I've done the base install of 2.0.1, how do I update it and not go to 2.0.2?
-
2.0.1 is the latest stable release.
2.0.2 is imminent but has not yet been released, at all, even as a beta!
You should not have been able to update to it. It seems to be a config carried over by upgrading to 2.0 final from an RC version.
Did you do that? If so did you do this?
2.1 snapshots are available: http://snapshots.pfsense.org/ but these are continuously in development so bugs may be introduced. YMMV! ;)You can choose to update to snapshots or stable in System: Firmware: Settings using the drop down. If you don't check 'Allow auto-update firmware images with a missing or invalid digital signature to be used.' you won't get bad updates.
Steve
-
I typed this in at normal shell: # pfSsh.php playback gitsync RELENG_2_0
I thought it was only supposed to update the php code in the current release, which is 2.0.1.
-
There were binary changes for 2.0.2 that are required to use it, it isn't just a source upgrade. If you gitsync to RELENG_2_0 it will most likely leave you with a broken system.
You can gitsync back to RELENG_2_0_1 and get back to 2.0.1-RELEASE code.
