I am stuck whit Pfsense. It don't works ???
I have a Int connection whit 5 static Ip's.
The Ip's are:
VMware on internal 192.168.1.100
No i whant to use the 18.104.22.168 on a VMWare debian machien.
When i put it hard in the machien it wont work:S
How do i get the outgoing traffic of the vmware machien over 22.214.171.124
end how do i get the incoming traffic to the machien?
Sorry for my pore english:)
Thanks for your answers.
whit this i cannot put the 126.96.36.199 hard on the machien i think?
no you don't with that setup …
if you really need todo so, you can setup pfsense as a filter bridge ...
i whill look at it thanks
I don't need a DMZ network so can I do this whit 2 nics?
Whill the pfsense be the gateway?
I am stuck:S
I got my gateway from my provider:
My subnet is 29
10,11,12,13,14,15 are my IP adresses.
The Wan of my PFsense is 188.8.131.52 255.255.255.248 184.108.40.206
I gif my vm machien 220.127.116.11 255.255.255.248 18.104.22.168 (here i gif up that the gateway is the PFsense?
Is this correct?
I have made a bridge:
Interface Members Description
BRIDGE0 WAN, LAN webserver
The vm machien doesh not have network?
trying a lot past days, but no fix found for my isseu.
Pfsense IP: 22.214.171.124
| subnet: 192.168.1.1
Above the connection how i want it to be.
i got a modem from my provider, PFsense whit 2 ethernet ports, switch: whit a subnet, and 1 machien the Centos.
How do i get a outgoing IP adres on true the firewall.
I hope i explain it ok.
thanks for looking.