Multi wan

ehvc

hello,

I am stuck whit Pfsense. It don't works ???

I have a Int connection whit 5 static Ip's.
The Ip's are:
PFSense: 217.0.0.10
Gateway: 217.0.0.9
VMware on internal 192.168.1.100

No i whant to use the 217.0.0.11 on a VMWare debian machien.
When i put it hard in the machien it wont work:S

How do i get the outgoing traffic of the vmware machien over 217.0.0.11
end how do i get the incoming traffic to the machien?

Sorry for my pore english:)

Thanks for your answers.

Greats Vincent

heper

you can use Virtual IP's and NAT

http://doc.pfsense.org/index.php/What_are_Virtual_IP_Addresses%3F
http://doc.pfsense.org/index.php/How_can_I_forward_ports_with_pfSense%3F

ehvc

whit this i cannot put the 217.0.0.11 hard on the machien i think?

heper

no you don't with that setup …

if you really need todo so, you can setup pfsense as a filter bridge ...
http://forum.pfsense.org/index.php/topic,41063.msg212423.html#msg212423

ehvc

i whill look at it thanks

ehvc

I don't need a DMZ network so can I do this whit 2 nics?

ehvc

Whill the pfsense be the gateway?

ehvc

I am stuck:S

I got my gateway from my provider:
217.0.0.9
My subnet is 29
10,11,12,13,14,15 are my IP adresses.
The Wan of my PFsense is 217.0.0.10 255.255.255.248 217.0.0.9

I gif my vm machien 217.0.0.11 255.255.255.248 217.0.0.10 (here i gif up that the gateway is the PFsense?
Is this correct?

I have made a bridge:
Interface Members Description
BRIDGE0 WAN, LAN webserver

The vm machien doesh not have network?

Greats Vincent

ehvc

Hello,

trying a lot past days, but no fix found for my isseu.

Above the connection how i want it to be.
i got a modem from my provider, PFsense whit 2 ethernet ports, switch: whit a subnet, and 1 machien the Centos.

How do i get a outgoing IP adres on true the firewall.

I hope i explain it ok.

thanks for looking.
Vincent