• Categories
  • Recent
  • Tags
  • Popular
  • Users
  • Search
  • Register
  • Login
Netgate Discussion Forum
  • Categories
  • Recent
  • Tags
  • Popular
  • Users
  • Search
  • Register
  • Login

CP problem

Scheduled Pinned Locked Moved Captive Portal
6 Posts 3 Posters 2.9k Views
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • M
    Morten
    last edited by Aug 30, 2012, 11:25 AM Aug 30, 2012, 11:01 AM

    Hello..

    network design:

    internet == pfsense == 3560x ==(GRE tunnel)== 3560G == PC (in VLAN 10)
                                          ||
                                  DC/DNS/DHCP

    –--------------------
    Network Config:
    pfsence == 3560x : 172.16.0.0/30
    3560X == DC/DNS/DHCP : 10.15.249.128/28
    3560x == 3560G : 172.16.1.0/30
    3560G == PC : 10.15.0.0/22

    Problem:
    How do i get the captive portal to catch all request from the PC??
    Can this setup even be done, with pfsense???

    –--------------------
    with the current setup i have tryed the following:
    Disable Captive portal - The pc can browse the internet
    Enable Captive portal - No internet on the PC, No login portal either.

    1 Reply Last reply Reply Quote 0
    • N
      Nachtfalke
      last edited by Aug 30, 2012, 11:08 AM

      DNS on the clients must be the IP of VLAN10 as far as I know.
      To make sure CP is working you can enter the IP of VLAN10 interface with port 8000
      like this:
      http://192.168.100.1:8000

      Not sure how to do that with an other DNS server than pfsense.

      1 Reply Last reply Reply Quote 0
      • M
        Morten
        last edited by Aug 30, 2012, 11:48 AM Aug 30, 2012, 11:21 AM

        If i use the IP on pfsense (172.16.0.1:8000) from the PC the portal is working, but without redirect.
        but if i use a DNS address (google.com) i dont get the protal, just a timeout.

        It is not a option to use the 172.16.0.1:8000 as 80-85% of the pc that is going to be connectet will be private PC's witch i dont have control over.

        –--------------------
        your sugestion is to use a IP in vlan, like 10.15.3.254:8000 (gateway vlan 10) only gives me a time out (IE cant display the page)


        Im only using the captive portal, all other features shoud be disablet.

        1 Reply Last reply Reply Quote 0
        • E
          eri--
          last edited by Aug 30, 2012, 1:59 PM

          is the 3560 doing the routing in this schema?
          Is the option to not use mac addresses in CP disabled?
          Anything from logs?

          1 Reply Last reply Reply Quote 0
          • M
            Morten
            last edited by Aug 31, 2012, 6:48 AM

            @ermal:

            is the 3560 doing the routing in this schema?

            Yes, the 3560x is doing all the routing, that part is working just fine. (there is access to the internet from PC when CP is  disabled)

            @ermal:

            Is the option to not use mac addresses in CP disabled?

            Yes, that option is  disabled

            @ermal:

            Anything from logs?

            what log do you want to see??

            1 Reply Last reply Reply Quote 0
            • E
              eri--
              last edited by Aug 31, 2012, 7:02 AM

              CP and system logs.

              1 Reply Last reply Reply Quote 0
              1 out of 6
              • First post
                1/6
                Last post
              Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.
                This community forum collects and processes your personal information.
                consent.not_received