Strange Reboots and Corrupt filesystem with 1.2 BETA1



  • Hi,

    I'm facing a really weird problem, I thought it was my configuration and/or CARP but no, it's in my logs detailed very well.

    I have installed 1.2 BETA1 on a healthy Raid5 set and configured it as a transparent bridge that actuall works OK.

    I was seeing in the ARP-table of my router that the IP's were dissapearing from time to time and the system was not reachable. I thought it could be the Firewall rules, but then it came up again and I could visit the WebGUI again. I have 2 systems that I want to failover with spanning tree or maybe the complex way, and I saw this very soon on my second system, now my first has the same so I checked my logs.

    Here is one:

    
    Jun 16 14:39:09 kernel: fdc0: does not respond 
    Jun 16 14:39:09 kernel: device_attach: fdc0 attach returned 6 
    Jun 16 14:39:09 kernel: sio1: configured irq 3 not in bitmap of probed irqs 0 
    Jun 16 14:39:09 kernel: sio1: port may not be enabled 
    Jun 16 14:39:09 kernel: pmtimer0 on isa0 
    Jun 16 14:39:09 kernel: orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xe8000-0xedfff,0xee000-0xeffff on isa0 
    Jun 16 14:39:09 kernel: sc0: <system console="">at flags 0x100 on isa0 
    Jun 16 14:39:09 kernel: sc0: VGA <16 virtual consoles, flags=0x300> 
    Jun 16 14:39:09 kernel: sio1: configured irq 3 not in bitmap of probed irqs 0 
    Jun 16 14:39:09 kernel: sio1: port may not be enabled 
    Jun 16 14:39:09 kernel: vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 
    Jun 16 14:39:09 kernel: Timecounter "TSC" frequency 701596359 Hz quality 800 
    Jun 16 14:39:09 kernel: Timecounters tick every 1.000 msec 
    Jun 16 14:39:09 kernel: Fast IPsec: Initialized Security Association Processing. 
    Jun 16 14:39:09 kernel: Waiting 5 seconds for SCSI devices to settle 
    Jun 16 14:39:09 kernel: acd0: CDROM <compaq crn-8241b="" 2.23="">at ata0-master PIO4 
    Jun 16 14:39:09 kernel: Trying to mount root from ufs:/dev/idad0s1a 
    Jun 16 14:39:09 kernel: WARNING: / was not properly dismounted 
    Jun 16 14:39:09 kernel: WARNING: R/W mount of / denied. Filesystem is not clean - run fsck 
    Jun 16 14:39:09 kernel: WARNING: R/W mount of / denied. Filesystem is not clean - run fsck 
    Jun 16 14:39:10 kernel: fxp0: link state changed to UP 
    Jun 16 14:39:10 kernel: fxp1: link state changed to UP 
    Jun 16 14:39:10 kernel: bridge0: Ethernet address: 26:b6:0c:6d:6c:e9 
    Jun 16 14:39:10 kernel: em1: link state changed to DOWN 
    Jun 16 14:39:11 kernel: em0: link state changed to DOWN 
    Jun 16 14:39:12 kernel: em1: promiscuous mode enabled 
    Jun 16 14:39:12 kernel: em0: promiscuous mode enabled 
    Jun 16 14:39:13 sshd[275]: Server listening on :: port 22\. 
    Jun 16 14:39:13 sshd[275]: Server listening on 0.0.0.0 port 22\. 
    Jun 16 14:39:13 sshlockout[276]: sshlockout starting up 
    Jun 16 14:39:13 sshlockout[276]: sshlockout starting up 
    Jun 16 14:39:15 kernel: em1: link state changed to UP 
    Jun 16 14:39:15 kernel: em0: link state changed to UP 
    Jun 16 14:39:35 kernel: pflog0: promiscuous mode enabled 
    Jun 16 14:39:41 pftpx[514]: listening on 127.0.0.1 port 8021 
    Jun 16 14:39:41 pftpx[514]: listening on 127.0.0.1 port 8021 
    Jun 16 14:39:41 pftpx[522]: listening on 127.0.0.1 port 8022 
    Jun 16 14:39:41 pftpx[522]: listening on 127.0.0.1 port 8022 
    Jun 16 14:39:41 pftpx[530]: listening on 127.0.0.1 port 8023 
    Jun 16 14:39:41 pftpx[530]: listening on 127.0.0.1 port 8023 
    Jun 16 14:39:45 dnsmasq[596]: started, version 2.36 cachesize 150 
    Jun 16 14:39:45 dnsmasq[596]: compile time options: IPv6 GNU-getopt ISC-leasefile no-DBus no-I18N 
    Jun 16 14:39:45 dnsmasq[596]: reading /etc/resolv.conf 
    Jun 16 14:39:45 dnsmasq[596]: using nameserver xxx.xxx.xxx2#53 
    Jun 16 14:39:45 dnsmasq[596]: using nameserver xxx.xxx.xxx.1#53 
    Jun 16 14:39:45 dnsmasq[596]: read /etc/hosts - 2 addresses 
    Jun 16 14:40:33 php: : Creating rrd update script 
    Jun 16 14:40:50 php: : Resyncing configuration for all packages. 
    Jun 16 14:40:51 check_reload_status: check_reload_status is starting 
    Jun 16 14:40:53 login: login on ttyv0 as root</compaq></generic></system></isa> 
    
    
    Jun 16 14:53:32 kernel: sio0: type 16550A 
    Jun 16 14:53:32 kernel: sio1: configured irq 3 not in bitmap of probed irqs 0 
    Jun 16 14:53:32 kernel: sio1: port may not be enabled 
    Jun 16 14:53:32 kernel: fdc0: <floppy drive="" controller="">port 0x3f2-0x3f5 irq 6 drq 2 on acpi0 
    Jun 16 14:53:32 kernel: fdc0: does not respond 
    Jun 16 14:53:32 kernel: device_attach: fdc0 attach returned 6 
    Jun 16 14:53:32 kernel: sio1: configured irq 3 not in bitmap of probed irqs 0 
    Jun 16 14:53:32 kernel: sio1: port may not be enabled 
    Jun 16 14:53:32 kernel: pmtimer0 on isa0 
    Jun 16 14:53:32 kernel: orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xe8000-0xedfff,0xee000-0xeffff on isa0 
    Jun 16 14:53:32 kernel: sc0: <system console="">at flags 0x100 on isa0 
    Jun 16 14:53:32 kernel: sc0: VGA <16 virtual consoles, flags=0x300> 
    Jun 16 14:53:32 kernel: sio1: configured irq 3 not in bitmap of probed irqs 0 
    Jun 16 14:53:32 kernel: sio1: port may not be enabled 
    Jun 16 14:53:32 kernel: vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 
    Jun 16 14:53:32 kernel: Timecounter "TSC" frequency 701594534 Hz quality 800 
    Jun 16 14:53:32 kernel: Timecounters tick every 1.000 msec 
    Jun 16 14:53:32 kernel: Fast IPsec: Initialized Security Association Processing. 
    Jun 16 14:53:32 kernel: Waiting 5 seconds for SCSI devices to settle 
    Jun 16 14:53:32 kernel: acd0: CDROM <compaq crn-8241b="" 2.23="">at ata0-master PIO4 
    Jun 16 14:53:32 kernel: Trying to mount root from ufs:/dev/idad0s1a 
    Jun 16 14:53:32 kernel: WARNING: / was not properly dismounted 
    Jun 16 14:53:32 kernel: WARNING: R/W mount of / denied. Filesystem is not clean - run fsck 
    Jun 16 14:53:32 kernel: WARNING: R/W mount of / denied. Filesystem is not clean - run fsck 
    Jun 16 14:53:32 kernel: fxp0: link state changed to UP 
    Jun 16 14:53:32 kernel: fxp1: link state changed to UP 
    Jun 16 14:53:32 kernel: bridge0: Ethernet address: 2e:46:71:df:34:a6 
    Jun 16 14:53:32 kernel: em1: link state changed to DOWN 
    Jun 16 14:53:33 kernel: em0: link state changed to DOWN 
    Jun 16 14:53:33 kernel: em1: promiscuous mode enabled 
    Jun 16 14:53:33 kernel: em0: promiscuous mode enabled 
    Jun 16 14:53:35 sshd[291]: Server listening on :: port 22\. 
    Jun 16 14:53:36 sshd[291]: Server listening on 0.0.0.0 port 22\. 
    Jun 16 14:53:36 sshlockout[292]: sshlockout starting up 
    Jun 16 14:53:36 sshlockout[292]: sshlockout starting up 
    Jun 16 14:53:37 kernel: em1: link state changed to UP 
    Jun 16 14:53:38 kernel: em0: link state changed to UP 
    Jun 16 14:53:57 kernel: pflog0: promiscuous mode enabled 
    Jun 16 14:54:03 pftpx[514]: listening on 127.0.0.1 port 8021 
    Jun 16 14:54:03 pftpx[514]: listening on 127.0.0.1 port 8021 
    Jun 16 14:54:03 pftpx[522]: listening on 127.0.0.1 port 8022 
    Jun 16 14:54:03 pftpx[522]: listening on 127.0.0.1 port 8022 
    Jun 16 14:54:03 pftpx[530]: listening on 127.0.0.1 port 8023 
    Jun 16 14:54:03 pftpx[530]: listening on 127.0.0.1 port 8023 
    Jun 16 14:54:07 dnsmasq[596]: started, version 2.36 cachesize 150 
    Jun 16 14:54:07 dnsmasq[596]: compile time options: IPv6 GNU-getopt ISC-leasefile no-DBus no-I18N 
    Jun 16 14:54:07 dnsmasq[596]: reading /etc/resolv.conf 
    Jun 16 14:54:07 dnsmasq[596]: using nameserver xxx.xxx.xxx.2#53 
    Jun 16 14:54:07 dnsmasq[596]: using nameserver xxx.xxx.xxx.1#53 
    Jun 16 14:54:07 dnsmasq[596]: read /etc/hosts - 2 addresses</compaq></generic></system></isa></floppy> 
    

    So it looks like th system is failing, but both have problems and it should be strange when 2 should have the exact and same problem.

    The device, a Compaq DL580 G1 has a BIOS-OS setting with "Unix large drive Geometry", maybe this could be a problem ?

    Or shall I upgrade to a Snapshot version ?

    I hope someone has a clue about this, the HW should be 100% fine.

    Matt


Log in to reply