PfSense as a DSL Router
-
I wonder if I could purchase a U-Verse router/modem and use it as a bridge…
-
I wonder if I could purchase a U-Verse router/modem and use it as a bridge…
What make/model is your current ISP supplied hardware? Can you find a full manual for it? What does it say?
-
I wonder if I could purchase a U-Verse router/modem and use it as a bridge…
What make/model is your current ISP supplied hardware? Can you find a full manual for it? What does it say?
So, with all of this in mind (and thank you all for your advice) I would have to purchase a separate modem because the bozo employee that set it up put me in a lease contract. So because I am leasing, and not owning the modem, I cannot alter ANY settings or they will terminate my internet service… Would any of you recommend any good modems to use as a bridge?
Emphasis mine.
-
Cannot change any settings on the leased modem but does that mean you can't replace it with your own modem and change the settings on that? Probably. ::)
But I'm sure there are people who have done it and if you ever have a problem just replace the leased modem.Steve
-
I could replace the modem/router with a purchased one. With that, I could alter the settings some. I don't know of any U-verse modems, though, that could be used as a bridge.
-
Something tells me it can't be that easy, the lack of bridging aside.
Something tells me that the Uverse unit you have is identifiable by AT&T and that identity is what is used to authorize your TV channel package.
-
It probably is identifiable… hmm. I will check it out with AT&T to see if I can replace my equipment and keep my service.
-
Hi, I'm new to pfSense and the forums and was wondering if it is possible to use pfSense as a DSL router, like my ISP provided to me.
Thanks
I was having serious bandwidth issues with my Zyxel PK5001Z from Centurylink and pfSense. Torrents downloads were erratic and unpredictable. Sometimes I had great speeds and other times were just dismal. Things were great with the pfSense box out of the loop. I happened upon a suggestion that I switch the Zyxel to Transparent Bridge mode. Once I found the instructions it took about 10 minutes to get it going. My pfsense box was already set for DHCP for my WAN connection so all I had to do really was setup the modem and restart both boxes. Here's some instructions from Centurylink: http://qwest.centurylink.com/internethelp/modem-pk5001z-adv-bridging-ctl.html
Of course your carrier may be different.
Running pfSense 2.03 and SNORT on an ASUS B75 chipset microATX with i3-3220 CPU + 16gb RAM + 120GB SSD + 2 Intel EXPI9301CT PCI-Express Gigabit NICs.
This has finally cured my bandwidth issues where the connection would just seem lost or severely lagging.
