Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Multicast issue..

    Routing and Multi WAN
    2
    7
    2.1k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • F
      froussy
      last edited by

      Good day,

      there is my setup before going further..

      I have FTTH at home. My ISP provide me a ONT, with "their" router to use. I'm plugging normally my pc and iptv box to it. I know it use Vlan35 for pppoe and vlan36 for iptv.

      Tonight, with pfsence, I was able to setup the wan connection to use both vlan, and get them working. I create a wan interface named WANINET for my pppoe connection, and WANIPTV for my Iptv stream.

      I added, in the route, a route for the multicast and 10.x subnet to go through the WANIPTV port.. I also setted up the IGMP proxy, and added 2 rules in the FW to allow traffic (224.0.0.0/8 and 10.0.0.0/4) to the WANIPTV network..

      My internet connection work, and IPTV too.. im able to watch tv, all channels.. BUT.. only one thing.. after 10 seconds, the TV tell me that there is a loss of signal. I change channel and it come back, for another 10 seconds..

      Where can I look for that?

      Thanks a lot,

      1 Reply Last reply Reply Quote 0
      • H
        heper
        last edited by

        let me first say, that i have no clue how to fix the issue you are having. (it could be lots of things that only a packet capture could provide an answer)

        however …. do you really need to route that iptv vlan ? have you considered bridging the iptv-wan to the iptv-lan. i can't guarantee this will work, but i figure it's worth a shot.
        That way you eliminate possible issues with, for example, igmp-proxy

        1 Reply Last reply Reply Quote 0
        • F
          froussy
          last edited by

          I just tried.. no succes.. even worse.. no stream at all..

          im back to 0.. i only have 10 seconds stream..

          1 Reply Last reply Reply Quote 0
          • F
            froussy
            last edited by

            I did a packet capture.. i didnt found anything.. and somebody told me mtu can affect.. how to find the right value?

            If anyone can help, i can post the capture file.

            1 Reply Last reply Reply Quote 0
            • H
              heper
              last edited by

              http://www.dslreports.com/faq/695

              1 Reply Last reply Reply Quote 0
              • F
                froussy
                last edited by

                I saw it. But i cant ping the ip on the iptv network

                1 Reply Last reply Reply Quote 0
                • F
                  froussy
                  last edited by

                  I tought about one thing… is that possible that the "firewall" is acting on the IPTV Interface?  if so, how can I disable it on that interface and leave it only on the Internet Wan PPPoE Interface?

                  1 Reply Last reply Reply Quote 0
                  • First post
                    Last post
                  Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.