One WAN and 2 (LANs) with two differents real static address



  • Hello every body ,
    i have a question to ask ,  ???can i setup pfsense with one WAN  and two LANs with a differents real static ip address? ???
    thank you all.


  • Rebel Alliance



  • First in Firewall/Virtual IPs you need to define your additional IP addresses.
    Use these settings for each additional IP:
    Type: IP Alias
    Interface: WAN
    IP Address(es): xxx.xxx.xxx.xxx/32 (your additional static IP)

    Then go to Firewall/NAT/Outbound and select Manual Outbound and click on "Save". Then add rules for each LAN with these settings:

    Interface: WAN
    Protocol: any
    Source: Network, address: 192.168.20.0/24
    Destination: Type: any
    Translation: Address: –> Interface Address

    Interface: WAN
    Protocol: any
    Source: Network, address: 192.168.30.0/24
    Destination: Type: any
    Translation: Address: --> Select virtual IP with your static IP

    Then test from LAN 192.168.20.0 and 192.168.30.0 with http://checkip.org
    Do not forget to add rules in LAN1 and LAN2 to disable traffic from LAN1 to LAN2 and from LAN2 to LAN1.


Locked