Snort and Interface Enable/Disable
-
Would be good if one could tag Ermal in this topic…. :)
-
Truly amazing. If you need any help testing anything or implementing any changes, let me know. We have 2 systems here, and getting this up and running really would simplify so many matters on our end. Hopefully the moderators pick this up!
Thanks. I use pfSense in a home network environment. I'm testing using a VMware virtual machine. So far I've tested only on 32-bit code. I suspect my changes will work fine on 64-bit, but I want to create a 64-bit VM to test with as well.
I have two pieces still in progress: (1) implementing the pre-defined IDS policies, and (2) a more robust enablesid and disablesid functionality that survives rule updates. I work on my changes during the evenings when I'm home. Hopefully I can have test files ready to post by this weekend.
-
DAMN NICE!!
-
bmeeks, thanks for your very promising work.
Would be good if one could tag Ermal in this topic….
It seems to me that Snort is a complex piece of software that requires one to have a certain amount hands-on-experience with IDS, in order to create a fully functional pfsense package.
Apparently a new binary will be nice, because 2.9.2.3 is going EoL soon.
Snort Version Released EOL
Snort 2.9.2.3 2012-05-16 2013-02-28
Snort 2.9.3.1 2012-08-12 TBD**
Snort 2.9.4.0 2012-11-30 TBD** -
Snort is indeed a bit complex and somewhat sensitive to the settings in the snort.conf file (no big surprise there ;) )
I am quite close to being finished with my modifications and updates. Here is a screenshot of some of the new features that are working. I have corresponded with the Forum admins, and the recommended course of action for posting my code is via Github and then executing a Pull Request for Ermal or others on the pfSense team to evaluate. So I will not post modified PHP files directly to the forum, but will instead have them available on my fork of the Github pfsense-packages repository. I will post a link back here when things are posted.
Are there any particular settings for the HTTP_Inspect or Stream5 preprocessors that anyone would like to have GUI configuration parameters available for? Below you can see what will be available (if my submissions are accepted by the pfSense team).
New Preprocessors tab showing additional settings
 -
Here is another screenshot of the new Categories tab showing the features I've added for IPS Policy selection and automatic flowbit resolution for selected rules.
New Categories tab (partial)
 -
Last post for this evening…
For those of you that use the enablesid and disablesid feature in the Snort package, I've found some potential big bugs with its implementation in the current code base. In particular, it can't cope with multi-line rules. These are rules with a backslash ("") at the end of the line followed by a newline to signal continuation onto the next line. There are a handful of these multi-line rules in the rule sets from Emerging Threats and the Snort VRT. The current code just assumes any newline indicates the end of a rule when reading a rules file. Obviously with multi-line rules this is a mistake.
This bug, combined with the way the old code physically wrote back to disk a modified version of the rules file when enablesid or disablesid was used, risks writing a corrupt rules file when the original contains any multi-line rules.
My new procedure for handling enablesid and disablesid will fix this potential bug. I'm including the capability to "reset to defaults" any rules you may have previously disabled or enabled. The "reset to defaults" feature will return all the rules in a particular category to their default state, effectively wiping the slate clean of any modifications you previously made.
Of course I'm also adding the necessary hooks to ensure that any disablesid or enablesid customizations are preserved across rule updates... ;D
-
Is it possible that this could go into 2.0.3 as well??
Since current Snort package EOL??
Pls. push Jim and Ermal for this if you can!
-
Is it possible that this could go into 2.0.3 as well??
Since current Snort package EOL??
My changes are entirely contained within the handful of *.PHP files that comprise the GUI piece of the Snort package. They require no changes to the Snort binary nor to the underlying pfSense code in order to work, so assuming my changes are accepted by the pfSense team, a new Snort package (say v2.5.3) could be posted in the repository. It would work with 2.0, 2.0.1, 2.0.2 or even a 2.0.3 pfSense installation.
I don't have a Snort 2.9.4.2 binary (for FreeBSD) to test with, but I'm pretty confident my changes will work fine with the latest Snort binary. I've reviewed the 2.9.4.2 docs and see nothing that should be a problem in terms of configuration changes.
-
So basically we need to compile a new package for Pfsense?
-
So basically we need to compile a new package for Pfsense?
Yeah, that's essentially correct. Although, for someone with quite moderate "geek" skills, my updated files can be copied to an existing pfSense installation and used without recompiling anything. The Snort package itself on pfSense consists of essentially three parts: (1) the Snort binary module, (2) some support libraries for the binary module, and (3) a collection of PHP files that comprise the GUI. Really all the GUI for Snort does is peform the function of creating the snort.conf file. The snort.conf file is where all the configuration information lives for the Snort binary.
My updates and new features for Snort are really just additions and corrections to the PHP code that runs the GUI and builds the snort.conf file. So to use my updated files, you just copy them to the two sub-directories where the Snort PHP stuff resides and then everything just works. No reboot, and no compiling. Of course a rudimentary level of "geek skill" is required to copy over the files. This can be as simple as knowing how to use WinSCP, for instance… :)
The point of a formal package update would be to make the overall installation simple (just click the icon in the Packages tab). Now updating to the latest version of the Snort binary will require compiling the underlying package. However, a new binary is not necessary to start taking advantage of the changes I've made.
-
If the current package is seeing EOL anyway, then I suggest writing to Ermal or Jim to get them to compile it before it goes EOL.
-
If the current package is seeing EOL anyway, then I suggest writing to Ermal or Jim to get them to compile it before it goes EOL.
Pushing for an update to the latest 2.9.4.x Snort binary is my plan. I should finish my PHP code tweaks and have everything posted later today or by the end of the weekend to Github. I will then create the Pull Request to signal Ermal and others on the pfSense team to take a look at my changes.
-
Damn nice mate!! The world would be a fecking nice place to be if populated by folks like you :)
-
Here is a link to the Github Pull Request that has the code changes I am proposing for the Snort package.
https://github.com/bsdperimeter/pfsense-packages/pull/352
The Pull Request has a change log highlighting the major modifications. It also has the modified files with the changes highlighted. Should any of you want to test on your own system, contact me via PM and I can provide the files and instructions for using them. I recommend that any testing be done initially on non-production systems. I have been running the changes on two different pfSense VMs in VMware with no issues.
Bill
-
Here is a link to the Github Pull Request that has the code changes I am proposing for the Snort package.
This pic says its all :)
-
@onhel:
This pic says its all :)
Yeah, the Github summary shows each and every changed or deleted line. Sort of makes it look like more work than it really is.
I would like to recruit a few testers willing to give the changes a shake down in a non-production environment. The changes are super easy to back out if something causes a problem. To implement the changes, you just copy a few files to two folders after renaming the existing target files (to have as backups). No reboot necessary. To back out, just copy the renamed previously existing files (the backups) over top of the new files.
Bill
-
PM Sent
-
@onhel:
PM Sent
Replied at 4:20 PM EST. Thanks for volunteering.
-
Seems to be working with a few caveats.
In testing the memcap setting, the most surefire way I know to trigger the "S5: Pruned 5 sessions from cache for memcap" error was to run a speedtest and max out my bandwidth. I have a 50/5 connection so your recommendation of a 32MB Stream5 memcap was still setting off that error. I raised it to 134217728 (128MB) since I have a lot of free memory and that error is now gone. :)
When I go into the Rules tab, instead of getting the Rules page, I seem to be getting the Github webpage for the Rules code but the web address is still showing as 192.168.1.1:443/snort/snort_rules.php?id=0Redownloaded from GIT and overwrote again and its working now.
Did I copy the file wrong?I also noticed that when I went to Update Rules, it completed successfully but gave an error at the bottom of the screen complaining of a line 9xx in snort.inc. I copied the line to post here but in my excitement of trying to see if Stream5 was fixed I copied some text again and it got overwritten. I've gone back to Update Rules again but I can not reproduce the error that I saw initially, might have to wait for a newer rule update that I can download.
Enabling an interface kicks off this error but System Logs show Initialization Complete and the Interface in fact does Enable.
Warning: is_dir() expects parameter 1 to be string, array given in /usr/local/pkg/snort/snort.inc on line 924 Warning: is_file() expects parameter 1 to be string, array given in /usr/local/pkg/snort/snort.inc on line 926 Warning: is_dir() expects parameter 1 to be string, array given in /usr/local/pkg/snort/snort.inc on line 924 Warning: is_file() expects parameter 1 to be string, array given in /usr/local/pkg/snort/snort.inc on line 926 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/pkg/snort/snort.inc:924) in /usr/local/www/snort/snort_interfaces.php on line 129 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/pkg/snort/snort.inc:924) in /usr/local/www/snort/snort_interfaces.php on line 130 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/pkg/snort/snort.inc:924) in /usr/local/www/snort/snort_interfaces.php on line 131 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/pkg/snort/snort.inc:924) in /usr/local/www/snort/snort_interfaces.php on line 132 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/pkg/snort/snort.inc:924) in /usr/local/www/snort/snort_interfaces.php on line 133 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/pkg/snort/snort.inc:924) in /usr/local/www/snort/snort_interfaces.php on line 136
