Radvd not starting with Jan 24 snapshot and lastest gitsync

Cino

radvd is not starting with the lastest snapstop… I'm able to get it to manually start aftering adding the interface to the config file

2.1-BETA1 (i386)
built on Thu Jan 24 19:53:59 EST 2013
FreeBSD 8.3-RELEASE-p5


Jan 27 07:08:40 	php: /status_services.php: The command '/usr/local/sbin/radvd -p /var/run/radvd.pid -C /var/etc/radvd.conf -m syslog' returned exit code '1', the output was ''

Jan 27 07:08:40 	radvd[93938]: Exiting, failed to read config file.
Jan 27 07:08:40 	radvd[93938]: error parsing or activating the config file: /var/etc/radvd.conf
Jan 27 07:08:40 	radvd[93938]: syntax error in /var/etc/radvd.conf, line 3: {
Jan 27 07:08:40 	radvd[93938]: version 1.8.5 started

eri--

Should be fixed on last snapshot.

Cino

thanks Ermal! Its fix now.. Noticed another problem. My IPv6 DHCP isn't providing a static IP address anymore. Has something change or is it broke? I checked the process and its not running. Noticed another thread on the issue but no one has responded yet.

http://forum.pfsense.org/index.php/topic,57259.0.html

edit: I checked the file system and the dhcpdv6.conf hasn't been updated since the 25th when i did a firmware update. I was able to manually run it typing:


 /usr/local/sbin/dhcpd -6 -user dhcpd -group _dhcp -chroot /var/dhcpd -cf /etc/dhcpdv6.conf -pf /var/run/dhcpdv6.pid em2

eri--

Should be fixed in latest code.

Cino

thank you! its running now and shelling out ipv6 addresses

c0re

I just updated to the following build and have have the same issue (radvd won't start)

2.1-BETA1 (i386)
built on Sun Jan 27 04:27:25 EST 2013

Previously I was on a beta build from last October and it was working fine. Any suggestions?

eri--

You need the one that will come next or gitsync.