Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Random reboots

    2.1 Snapshot Feedback and Problems - RETIRED
    3
    6
    1.7k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      MaxPF
      last edited by

      I have been having random reboots on my Alix 2D13 with a USB wifi adapter based on RT3070 chipset (run driver).
      I managed to capture these:

      Fatal trap 12: page fault while in kernel mode
      cpuid = 0; apic id = 00
      fault virtual address   = 0xc54cf908
      fault code              = supervisor read, page not present
      instruction pointer     = 0x20:0xc088e9fe
      stack pointer           = 0x28:0xe39c8c38
      frame pointer           = 0x28:0xe39c8c64
      code segment            = base 0x0, limit 0xfffff, type 0x1b
                             = DPL 0, pres 1, def32 1, gran 1
      processor eflags        = interrupt enabled, resume, IOPL = 0
      current process         = 0 (run0 taskq)
      trap number             = 12
      panic: page fault
      cpuid = 0
      Uptime: 22m1s
      Cannot dump. Device not defined or unavailable.

      Fatal trap 12: page fault while in kernel mode
      cpuid = 0; apic id = 00
      fault virtual address   = 0xc5a39908
      fault code              = supervisor read, page not present
      instruction pointer     = 0x20:0xc088ed6e
      stack pointer           = 0x28:0xe39c8c38
      frame pointer           = 0x28:0xe39c8c64
      code segment            = base 0x0, limit 0xfffff, type 0x1b
                             = DPL 0, pres 1, def32 1, gran 1
      processor eflags        = interrupt enabled, resume, IOPL = 0
      current process         = 0 (run0 taskq)
      trap number             = 12
      panic: page fault
      cpuid = 0
      Uptime: 9h21m52s
      Cannot dump. Device not defined or unavailable.

      I'm not sure if it's related, but I also noticed that my logs are full of these messages repeating almost every minute:

      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: WPA rekeying GTK
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA yy:yy:yy:yy:yy:yy WPA: sending 1/2 msg of Group Key Handshake
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: sending 1/2 msg of Group Key Handshake
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA yy:yy:yy:yy:yy:yy WPA: EAPOL-Key timeout
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA yy:yy:yy:yy:yy:yy WPA: sending 1/2 msg of Group Key Handshake
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: EAPOL-Key timeout
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: sending 1/2 msg of Group Key Handshake
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA yy:yy:yy:yy:yy:yy WPA: EAPOL-Key timeout
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA yy:yy:yy:yy:yy:yy WPA: sending 1/2 msg of Group Key Handshake
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: EAPOL-Key timeout
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: sending 1/2 msg of Group Key Handshake
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA yy:yy:yy:yy:yy:yy WPA: EAPOL-Key timeout
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA yy:yy:yy:yy:yy:yy WPA: sending 1/2 msg of Group Key Handshake
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: EAPOL-Key timeout
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: sending 1/2 msg of Group Key Handshake
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA yy:yy:yy:yy:yy:yy WPA: EAPOL-Key timeout
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA yy:yy:yy:yy:yy:yy IEEE 802.1X: unauthorizing port
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: EAPOL-Key timeout
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.1X: unauthorizing port
      2013-01-27 8:30 PM,Info,192.168.1.1,run0_wlan0: STA yy:yy:yy:yy:yy:yy IEEE 802.11: deassociated
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA yy:yy:yy:yy:yy:yy WPA: event 2 notification
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA yy:yy:yy:yy:yy:yy IEEE 802.1X: unauthorizing port
      2013-01-27 8:30 PM,Info,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.11: deauthenticated due to local deauth request
      2013-01-27 8:30 PM,Info,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.11: deassociated
      2013-01-27 8:30 PM,Info,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.11: associated
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: event 1 notification
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: start authentication
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.1X: unauthorizing port
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: sending 1/4 msg of 4-Way Handshake
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: received EAPOL-Key frame (2/4 Pairwise)
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: sending 3/4 msg of 4-Way Handshake
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: received EAPOL-Key frame (4/4 Pairwise)
      2013-01-27 8:30 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.1X: authorizing port
      2013-01-27 8:30 PM,Info,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx RADIUS: starting accounting session 51055164-000001EB
      2013-01-27 8:30 PM,Info,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: pairwise key handshake completed (RSN)
      2013-01-27 8:30 PM,Info,192.168.1.1,DHCPREQUEST for 192.168.1.8 from xx:xx:xx:xx:xx:xx via bridge0
      2013-01-27 8:30 PM,Info,192.168.1.1,DHCPACK on 192.168.1.8 to xx:xx:xx:xx:xx:xx via bridge0
      2013-01-27 8:31 PM,Debug,192.168.1.1,run0_wlan0: WPA rekeying GTK
      2013-01-27 8:31 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: sending 1/2 msg of Group Key Handshake
      2013-01-27 8:31 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: EAPOL-Key timeout
      2013-01-27 8:31 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: sending 1/2 msg of Group Key Handshake
      2013-01-27 8:31 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: EAPOL-Key timeout
      2013-01-27 8:31 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: sending 1/2 msg of Group Key Handshake
      2013-01-27 8:31 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: EAPOL-Key timeout
      2013-01-27 8:31 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: sending 1/2 msg of Group Key Handshake
      2013-01-27 8:31 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: EAPOL-Key timeout
      2013-01-27 8:31 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.1X: unauthorizing port
      2013-01-27 8:31 PM,Info,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.11: deauthenticated due to local deauth request
      2013-01-27 8:31 PM,Info,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.11: deassociated
      2013-01-27 8:31 PM,Info,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.11: associated
      2013-01-27 8:31 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: event 1 notification
      2013-01-27 8:31 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: start authentication
      2013-01-27 8:31 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.1X: unauthorizing port
      2013-01-27 8:31 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: sending 1/4 msg of 4-Way Handshake
      2013-01-27 8:31 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: EAPOL-Key timeout
      2013-01-27 8:31 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: sending 1/4 msg of 4-Way Handshake
      2013-01-27 8:31 PM,Info,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.11: deassociated
      2013-01-27 8:31 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx WPA: event 2 notification
      2013-01-27 8:31 PM,Debug,192.168.1.1,run0_wlan0: STA xx:xx:xx:xx:xx:xx IEEE 802.1X: unauthorizing port

      I suspect it might be related with the USB adapter, but it used to work fine in the past.

      1 Reply Last reply Reply Quote 0
      • B
        bardelot
        last edited by

        @MaxPF:

        I suspect it might be related with the USB adapter, but it used to work fine in the past.

        Can you specify what "used to work fine in the past" exactly means? If it worked on a previous 2.1 snapshot, do you know which one was the last one that worked?

        Edit:
        Also without a full crash dump it's normally very hard to debug such problems.

        1 Reply Last reply Reply Quote 0
        • jimpJ
          jimp Rebel Alliance Developer Netgate
          last edited by

          Since both dumps mention run0, it probably is the USB wireless adapter.

          Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

          Need help fast? Netgate Global Support!

          Do not Chat/PM for help!

          1 Reply Last reply Reply Quote 0
          • M
            MaxPF
            last edited by

            I also suspect the USB adapter as the cause of the problem. In Dec-Jan I tried many 2.1 builds and up to a certain point and up to a certain point there were no reboots, but then it started (can't remember exactly when). It may be just a the adapter acting up, but I thought I'd post it just in case.

            Any idea why all the "EAPOL-Key timeout" messages with Android clients? In the wireless forum somebody else is having experiencing the same.

            1 Reply Last reply Reply Quote 0
            • M
              MaxPF
              last edited by

              I think this issue could be related to this thread

              1 Reply Last reply Reply Quote 0
              • M
                MaxPF
                last edited by

                It crashed and rebooted again after 28h of uptime. Now I set the traffic shaping only for the LAN interface instead on the bridged (LAN + WLAN) see if it make any difference.

                1 Reply Last reply Reply Quote 0
                • First post
                  Last post
                Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.