Default route gone after WAN interface save
-
2.1-BETA1 (i386) Mon Feb 4 03:44:30 snapshot.
ALIX 2d13 with simple LAN and WAN configured. WAN has a static IPv4 with fixed WAN gateway defined. Routing to internet is working fine.
Steps to produce the problem:- Open Interfaces-WAN, do not change anything, press save.
The default route is not in the routing table any more. Thus no internet access. - Go to System-Routing, edit the WAN Gateway, don ot change anything, press save.
The default route is back, internet works again.
Screen shots of routing table, before step 1, after step 1, after step 2.
This was so easily reproduced I thought I would post it here to document it, now I will have a look and see what might be causing this.
- Open Interfaces-WAN, do not change anything, press save.
-
I should have upgraded first :)
The problem is fixed now:
2.1-BETA1 (i386) built on Thu Feb 7 18:00:57 EST 2013
by https://github.com/bsdperimeter/pfsense/commit/613a3cc56385481e65bba59850db01fa8d62d630
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.