VLAN vIP's not working.
-
Sorry I think I may be explaining this badly :)
If we take vLAN 3 as an example
vLAN interface IP FW01 192.168.3.2
vLAN interface IP FW01 192.168.3.3
CARP vIP 192.168.3.1If I configure a pc and plug it into a port tagged for vlan3 I can ping 192.168.3.2 but not 192.168.3.1
Also I can use 192.168.3.2 as a gateway to browse the internet etc however 192.168.3.1 does not work.
I have heard of similar issues happening in a virtual environment but this is 100% physical.
Cheers
Wyvern
-
are your firewalls physical or virtual devices?
-
Hi,
They are both HP DL360's the LAN interface is using the onboard NIC's
Switches are HP Procurve 1910-24G
Cheers
-
if you could post the config of your firewalls and switches, that would help a lot.
xml config for firewalls, txt config for switches.
-
What carp status you have on both pfSense's GUI?
Any other device on your network using carps or vrrp?
-
What carp status you have on both pfSense's GUI?
Any other device on your network using carps or vrrp?
Hi,
The status on the primary firewall is active and the secondary firewall has backup. There are no other devices using carp.
I will post the configs shortly.
Cheers,
Wyvern
-
I am about to do the same exact setup. I'll let you know if I run into any troubles. However, keep posting your findings. I've got a project due within 1 week and will need to have working solution.
Thanks,
Daniel
-
Really strange but we went live over the weekend just using the primary server and I tested creating a vIP today and it worked….
No idea what went wrong or how it was resolved sorry. But thank you all for your help.
-
If it worked could you post your configuration please? ty :P
-
I think for CARP on ESX you have to have promiscuous mode turned on.
