VLan Support for PPPoE connections in the GUI
notjoe last edited by
Currently there is no support to configure a PPPoE connection to be on a vlan. Some providers such as Telefonica's fiber connection require a vlan setting. Their internet is on vlan X while their IPTV is on a different vlan. I would like to have a configuration option under the PPPoE config so that I can set a vlan.
This change (and I've read a few others requesting it) could/should be made part of pfSense so that others can take advantage of it in the future.
MPD5 (The software used for PPPoE connections) does support VLans as far as I know. This should be a simple GUI change I would think.
How much would you guys charge for this and/or does it exist in pfSense 2.0.3?
wallabybob last edited by
Currently there is no support to configure a PPPoE connection to be on a vlan.
Huh? I'm running PPPoE on a VLAN on bog standard pfSense 2.0.1. Something like:
1. Go to Interfaces -> (assign) and click on the VLANs tab to create the VLAN,
2. go to Interfaces -> (assign) and click on the "+" at the bottom right to add the VLAN to the pool of interfaces available to pfSense,
3. go to Interfaces -> (assign) and click on the PPPs tab then click on the "+" to add a new PPPoE interface (if necessary) then configure it
4. go to Interfaces -> (assign) to set the pfSense WAN interface to the newly configured PPPoE interface.
Klaws last edited by
I use PPPoE via VLAN as well. It worked with 2.0.1, it still works with 2.0.2, I do not expect it to break in 2.0.3…
It's also a mission-critical feature not only for people whi suffer from ISP stupidity, but also for people who VLAN switches as "port extenders".
xbipin last edited by
i just setup a new box using pppoe on vlan, everything works well.
pulpito last edited by
Hi notjoe ,
you are not right, I setup my pfsense for telefonica (movistar) optical fiber with no issues , and works great !
Vlans works whith pppoe perfect