Some errors.



  • definition/tmp/rules.debug:19: syntax error/tmp/rules.debug:20: syntax error/tmp/rules.debug:21: syntax error/tmp/rules.debug:22: syntax error/tmp/rules.debug:23: syntax error/tmp/rules.debug:24: syntax error/tmp/rules.debug:25: syntax error/tmp/rules.debug:26: syntax error/tmp/rules.debug:27: syntax error/tmp/rules.debug:28: syntax error/tmp/rules.debug:29: syntax errorpfctl: Syntax error in config file: pf rules not loaded The line in question reads [13]: altq on fxp0 bandwidth 10Mb queue { qWANRoot }    .:.

    php: : There were error(s) loading the rules: /tmp/rules.debug:13: no scheduler specified! /tmp/rules.debug:14: no scheduler specified! /tmp/rules.debug:16: queue qWANRoot has no parent /tmp/rules.debug:16: errors in queue definition /tmp/rules.debug:17: syntax error /tmp/rules.debug:18: queue qLANRoot has no parent /tmp/rules.debug:18: errors in queue definition /tmp/rules.debug:19: syntax error /tmp/rules.debug:20: syntax error /tmp/rules.debug:21: syntax error /tmp/rules.debug:22: syntax error /tm

    These are some errors I am getting, I assume they have something to do with the traffic shapping as they started showing up after I ran the traffic shapping wizard. I got errors in both .87 (I had manually added some games) then I upgraded to .90 and had to redo my traffic shaping but I just used the settings that came with .90.  I picked a couple of games and p2p programs that's about it,  everything else default.

    Should I be worried about these errors or are they not effecting anything?



  • Actually this bug could derive from two for the next version already fixed bugs:

    1. "no scheduler specified": earlier versions had support to select different schedulers. that support was dropped. The setting could be found at the advanced settings page. Due to a non complete removal this error could pop up if you save advanced settings AFTER you have run the shaper wizard. This is fixed in CVS

    2. "qwanroot has no parent": This could be cause by not having a bandwidth set at your wan interface in the bandwidthfiled at "Interfaces>WAN". Please check that setting and set it to 10 mbit/s if you have a nic running at 10 mbit there or 100 mbit/s if the link is 100. This also is fixed in the new upcoming release and won't be necessary with this new version.

    So: Check WAN Bandwithfield, then run the shaper and don't save advanced settings after that and you should be fine for now….hopefully  ;D
    Next version won't need these workarounds.



  • @hoba:

    Actually this bug could derive from two for the next version already fixed bugs:

    1. "no scheduler specified": earlier versions had support to select different schedulers. that support was dropped. The setting could be found at the advanced settings page. Due to a non complete removal this error could pop up if you save advanced settings AFTER you have run the shaper wizard. This is fixed in CVS

    2. "qwanroot has no parent": This could be cause by not having a bandwidth set at your wan interface in the bandwidthfiled at "Interfaces>WAN". Please check that setting and set it to 10 mbit/s if you have a nic running at 10 mbit there or 100 mbit/s if the link is 100. This also is fixed in the new upcoming release and won't be necessary with this new version.

    So: Check WAN Bandwithfield, then run the shaper and don't save advanced settings after that and you should be fine for now….hopefully  ;D
    Next version won't need these workarounds.

    You are right I don't have it set!  I have been meaning to set that option too.  I don't have it set for Lan either so my traffic shaping is probably not working so well.

    I think I will do a clean install on the next version,  I just hope I can remember all my settings :).

    Thanks for your help.


Log in to reply