Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    IPv6 DHCP-PD – radvd dies after interface reset - dhcpv6 does not reaquire addr

    2.1 Snapshot Feedback and Problems - RETIRED
    21
    166
    73.9k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • P
      priller
      last edited by

      Nope.  I did a fresh install of …

      2.1-RC0 (amd64)
      built on Tue Jun 11 06:04:26 EDT 2013
      FreeBSD 8.3-RELEASE-p8

      ...  The 1st time it booted, it successfully got IPv6 addressing.  I let it run a couple of hours and rebooted.  Now there is nothing I can do to get it to pull IPv6 addressing again.

      dhcp6c[68545]: dhcp6_ctl_authinit: failed to open /usr/local/etc/dhcp6cctlkey: No such file or directory
      dhcp6c[68545]: client6_init: failed initialize control message authentication
      dhcp6c[68545]: client6_init: skip opening control port

      Also, radvd doesn't even show up as a stopped service, it does not appear on the services screen.

      1 Reply Last reply Reply Quote 0
      • N
        netkeys
        last edited by

        I tried the update from today and it broke the working IPv6.

        1 Reply Last reply Reply Quote 0
        • C
          catfish99
          last edited by

          I'm on comcast service. Zoom Modem is IPv6 enabled. PFsense, well can't keep a ipv6 address.

          I'll stay at the latest beta that I have and update when there's a consensus that the IPv6 is working again.

          1 Reply Last reply Reply Quote 0
          • B
            BrianPlencner
            last edited by

            Back on May 9th, I did a clean install of this version

            2.1-BETA1 (i386)
            built on Thu May 9 07:05:02 EDT 2013
            FreeBSD 8.3-RELEASE-p8

            I was able to have IPv6 work for around 4 days before the lease from Comcast's DHCP servers renewed.

            After that point, I was not able to get IPv6 working again.

            What's interesting is if I do a full clean install, I still cannot get it to work. Its almost like something is left behind in some configuration somewhere that a full install does not remove.

            I am looking to download and install the latest beta build, but wondering if the problem has been fixed yet.  So, if someone has installed a newer build with some success, please pass that on.

            –Brian

            ============================
            – Brian Plencner

            E-Mail: CoasterBrian72Cancer@gmail.com
            Note: Kill Cancer to Reply via e-mail

            1 Reply Last reply Reply Quote 0
            • R
              razzfazz
              last edited by

              See my 6/10 post; I've had IPv6 connectivity on Comcast for more than four days straight with the June 4 snapshot. Haven't stayed on any one revision for long enough since.

              1 Reply Last reply Reply Quote 0
              • P
                priller
                last edited by

                @razzfazz:

                See my 6/10 post; I've had IPv6 connectivity on Comcast for more than four days straight with the June 4 snapshot. Haven't stayed on any one revision for long enough since.

                If you would like to do an experiment ….  reboot pfSense and see if it gets IPv6 addressing again.

                If I build a fresh install, it works exactly once.  If I reboot, it will not pull addressing again.

                1 Reply Last reply Reply Quote 0
                • R
                  razzfazz
                  last edited by

                  Done. Seems to get both a WAN and a LAN address just fine. (Ditto after firmware updates.)

                  1 Reply Last reply Reply Quote 0
                  • N
                    netkeys
                    last edited by

                    I installed the built on Wed Jun 12 17:13:09 EDT 2013 update and it seems to be working so far.

                    1 Reply Last reply Reply Quote 0
                    • E
                      eri--
                      last edited by

                      Can anybody confirm that when a renewal is not done either 2 dhcp6c processes are running or there is no default gw for v6?

                      1 Reply Last reply Reply Quote 0
                      • B
                        BrianPlencner
                        last edited by

                        I've seen a few posts here in the last few days that give the impression that builds after 06/10 appear to fix the issues at hand.

                        Before I go and download the latest beta build, I would like a bit more feedback from those that have, and if they got IPv6 working or not.

                        A few people here, and also on the Comcast forum over at Broadbandreports.com have suggested moving to m0n0wall.  I really don't want to do that as I am very happy with pfSense.  I would rather stay with that product, as it does everything that I need it to do.

                        Thanks!

                        –Brian

                        ============================
                        – Brian Plencner

                        E-Mail: CoasterBrian72Cancer@gmail.com
                        Note: Kill Cancer to Reply via e-mail

                        1 Reply Last reply Reply Quote 0
                        • P
                          priller
                          last edited by

                          @ermal:

                          Can anybody confirm that when a renewal is not done either 2 dhcp6c processes are running or there is no default gw for v6?

                          I'm currently on the following and will let it run its normal renewal course and report back.

                          2.1-RC0 (amd64)
                          built on Wed Jun 12 18:24:34 EDT 2013

                          Uptime: 1 Day 02 Hours 35 Minutes 25 Seconds

                          –

                          In a previous post, I mentioned that I was able to get IPV6 addressing once and then after a reboot, it was unable to get anything.  Always with the following logging:

                          dhcp6c[68545]: dhcp6_ctl_authinit: failed to open /usr/local/etc/dhcp6cctlkey: No such file or directory
                          dhcp6c[68545]: client6_init: failed initialize control message authentication
                          dhcp6c[68545]: client6_init: skip opening control port

                          … with the current build I'm running, I rebooted twice and it was ok.  So, stay tuned ...

                          1 Reply Last reply Reply Quote 0
                          • dotOneD
                            dotOne
                            last edited by

                            Today I tried to do some debugging.

                            What I found is that the DHCP process itself looks ok and also the PD is working.
                            But during the process the route command isn't found

                            During renewal an XID mismatch is generated.

                            [2.1-RC0][xxxx]/var/run(66): /usr/local/sbin/dhcp6c -d -D -f -c /var/etc/dhcp6c_wan.conf -p /var/run/dhcp6c_pppoe0.pid pppoe0
                            Jun/16/2013 17:18:15: get_duid: extracted an existing DUID from /var/db/dhcp6c_duid: 00:01:00:01:19:50:8e:29:48:5d:60:cb:50:36
                            Jun/16/2013 17:18:15: dhcp6_ctl_authinit: failed to open /usr/local/etc/dhcp6cctlkey: No such file or directory
                            Jun/16/2013 17:18:15: client6_init: failed initialize control message authentication
                            Jun/16/2013 17:18:15: client6_init: skip opening control port
                            Jun/16/2013 17:18:15: cfdebug_print: <3>[interface] (9)
                            Jun/16/2013 17:18:15: cfdebug_print: <5>[pppoe0] (6)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>begin of closure [{] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>[send] (4)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>[ia-na] (5)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>[0] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>end of sentence [;] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>comment [# request stateful address] (26)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>[send] (4)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>[ia-pd] (5)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>[0] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>end of sentence [;] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>comment [# request prefix delegation] (27)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>[request] (7)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>[domain-name-servers] (19)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>end of sentence [;] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>[request] (7)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>[domain-name] (11)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>end of sentence [;] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>[script] (6)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>["/var/etc/dhcp6c_wan_script.sh"] (31)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>end of sentence [;] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>comment [# we'd like some nameservers please] (35)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>end of closure [}] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>end of sentence [;] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>[id-assoc] (8)
                            Jun/16/2013 17:18:15: cfdebug_print: <13>[na] (2)
                            Jun/16/2013 17:18:15: cfdebug_print: <13>[0] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <13>begin of closure [{] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>end of closure [}] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>end of sentence [;] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>[id-assoc] (8)
                            Jun/16/2013 17:18:15: cfdebug_print: <13>[pd] (2)
                            Jun/16/2013 17:18:15: cfdebug_print: <13>[0] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <13>begin of closure [{] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>[prefix-interface] (16)
                            Jun/16/2013 17:18:15: cfdebug_print: <5>[bridge0] (7)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>begin of closure [{] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>[sla-id] (6)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>[32] (2)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>end of sentence [;] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>[sla-len] (7)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>[16] (2)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>end of sentence [;] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>end of closure [}] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>end of sentence [;] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>end of closure [}] (1)
                            Jun/16/2013 17:18:15: cfdebug_print: <3>end of sentence [;] (1)
                            Jun/16/2013 17:18:15: configure_pool: called
                            Jun/16/2013 17:18:15: clear_poolconf: called
                            Jun/16/2013 17:18:15: dhcp6_reset_timer: reset a timer on pppoe0, state=INIT, timeo=0, retrans=383
                            Jun/16/2013 17:18:16: client6_send: a new XID (37f7f7) is generated
                            Jun/16/2013 17:18:16: copy_option: set client ID (len 14)
                            Jun/16/2013 17:18:16: copyout_option: set identity association
                            Jun/16/2013 17:18:16: copy_option: set elapsed time (len 2)
                            Jun/16/2013 17:18:16: copy_option: set option request (len 4)
                            Jun/16/2013 17:18:16: copyout_option: set IA_PD
                            Jun/16/2013 17:18:16: client6_send: send solicit to ff02::1:2%pppoe0
                            Jun/16/2013 17:18:16: dhcp6_reset_timer: reset a timer on pppoe0, state=SOLICIT, timeo=0, retrans=1088
                            Jun/16/2013 17:18:16: client6_recv: receive advertise from fe80::2a0:a50f:fc78:5530%pppoe0 on pppoe0
                            Jun/16/2013 17:18:16: dhcp6_get_options: get DHCP option client ID, len 14
                            Jun/16/2013 17:18:16:  DUID: 00:01:00:01:19:50:8e:29:48:5d:60:cb:50:36
                            Jun/16/2013 17:18:16: dhcp6_get_options: get DHCP option server ID, len 26
                            Jun/16/2013 17:18:16:  DUID: 00:02:00:00:05:83:4a:4e:31:31:45:41:33:30:42:41:46:41:00:00:00:00:00:00:00:00
                            Jun/16/2013 17:18:16: dhcp6_get_options: get DHCP option IA_PD, len 41
                            Jun/16/2013 17:18:16:  IA_PD: ID=0, T1=3600, T2=5760
                            Jun/16/2013 17:18:16: copyin_option: get DHCP option IA_PD prefix, len 25
                            Jun/16/2013 17:18:16: copyin_option:  IA_PD prefix: 2001:980:93ab::/48 pltime=7200 vltime=7200
                            Jun/16/2013 17:18:16: dhcp6_get_options: get DHCP option identity association, len 18
                            Jun/16/2013 17:18:16:  IA_NA: ID=0, T1=0, T2=0
                            Jun/16/2013 17:18:16: copyin_option: get DHCP option status code, len 2
                            Jun/16/2013 17:18:16:  status code: no addresses
                            Jun/16/2013 17:18:16: dhcp6_get_options: get DHCP option DNS, len 32
                            Jun/16/2013 17:18:16: client6_recvadvert: server ID: 00:02:00:00:05:83:4a:4e:31:31:45:41:33:30:42:41:46:41:00:00:00:00:00:00:00:00, pref=-1
                            Jun/16/2013 17:18:16: client6_recvadvert: reset timer for pppoe0 to 0.771510
                            Jun/16/2013 17:18:17: select_server: picked a server (ID: 00:02:00:00:05:83:4a:4e:31:31:45:41:33:30:42:41:46:41:00:00:00:00:00:00:00:00)
                            Jun/16/2013 17:18:17: client6_send: a new XID (982ee) is generated
                            Jun/16/2013 17:18:17: copy_option: set client ID (len 14)
                            Jun/16/2013 17:18:17: copy_option: set server ID (len 26)
                            Jun/16/2013 17:18:17: copyout_option: set status code
                            Jun/16/2013 17:18:17: copyout_option: set identity association
                            Jun/16/2013 17:18:17: copy_option: set elapsed time (len 2)
                            Jun/16/2013 17:18:17: copy_option: set option request (len 4)
                            Jun/16/2013 17:18:17: copyout_option: set IA_PD prefix
                            Jun/16/2013 17:18:17: copyout_option: set IA_PD
                            Jun/16/2013 17:18:17: client6_send: send request to ff02::1:2%pppoe0
                            Jun/16/2013 17:18:17: dhcp6_reset_timer: reset a timer on pppoe0, state=REQUEST, timeo=0, retrans=977
                            Jun/16/2013 17:18:17: client6_recv: receive reply from fe80::2a0:a50f:fc78:5530%pppoe0 on pppoe0
                            Jun/16/2013 17:18:17: dhcp6_get_options: get DHCP option client ID, len 14
                            Jun/16/2013 17:18:17:  DUID: 00:01:00:01:19:50:8e:29:48:5d:60:cb:50:36
                            Jun/16/2013 17:18:17: dhcp6_get_options: get DHCP option server ID, len 26
                            Jun/16/2013 17:18:17:  DUID: 00:02:00:00:05:83:4a:4e:31:31:45:41:33:30:42:41:46:41:00:00:00:00:00:00:00:00
                            Jun/16/2013 17:18:17: dhcp6_get_options: get DHCP option IA_PD, len 41
                            Jun/16/2013 17:18:17:  IA_PD: ID=0, T1=3600, T2=5760
                            Jun/16/2013 17:18:17: copyin_option: get DHCP option IA_PD prefix, len 25
                            Jun/16/2013 17:18:17: copyin_option:  IA_PD prefix: 2001:980:93ab::/48 pltime=7200 vltime=7200
                            Jun/16/2013 17:18:17: dhcp6_get_options: get DHCP option identity association, len 18
                            Jun/16/2013 17:18:17:  IA_NA: ID=0, T1=0, T2=0
                            Jun/16/2013 17:18:17: copyin_option: get DHCP option status code, len 2
                            Jun/16/2013 17:18:17:  status code: no addresses
                            Jun/16/2013 17:18:17: dhcp6_get_options: get DHCP option DNS, len 32
                            Jun/16/2013 17:18:17: info_printf: nameserver[0] 2001:888:0:6::66
                            Jun/16/2013 17:18:17: info_printf: nameserver[1] 2001:888:0:9::99
                            Jun/16/2013 17:18:17: get_ia: make an IA: PD-0
                            Jun/16/2013 17:18:17: update_prefix: create a prefix 2001:980:93ab::/48 pltime=7200, vltime=7200
                            Jun/16/2013 17:18:17: ifaddrconf: add an address 2001:980:93ab:20:fe:4aff:fec8:9c00/64 on bridge0
                            Jun/16/2013 17:18:17: get_ia: make an IA: NA-0
                            Jun/16/2013 17:18:17: update_ia: status code for NA-0: no addresses
                            Jun/16/2013 17:18:17: update_ia: IA NA-0 is invalidated
                            Jun/16/2013 17:18:17: remove_ia: remove an IA: NA-0
                            Jun/16/2013 17:18:17: dhcp6_reset_timer: reset a timer on pppoe0, state=INIT, timeo=0, retrans=915
                            Jun/16/2013 17:18:17: client6_recvreply: executes /var/etc/dhcp6c_wan_script.sh
                            route: not found
                            route: not found
                            Jun/16/2013 17:18:24: client6_script: script "/var/etc/dhcp6c_wan_script.sh" terminated
                            Jun/16/2013 17:18:24: dhcp6_remove_event: removing an event on pppoe0, state=REQUEST
                            Jun/16/2013 17:18:24: dhcp6_remove_event: removing server (ID: 00:02:00:00:05:83:4a:4e:31:31:45:41:33:30:42:41:46:41:00:00:00:00:00:00:00:00)
                            Jun/16/2013 17:18:24: client6_recvreply: got an expected reply, sleeping.
                            Jun/16/2013 17:18:24: client6_send: a new XID (e4dbbb) is generated
                            Jun/16/2013 17:18:24: copy_option: set client ID (len 14)
                            Jun/16/2013 17:18:24: copyout_option: set identity association
                            Jun/16/2013 17:18:24: copy_option: set elapsed time (len 2)
                            Jun/16/2013 17:18:24: copy_option: set option request (len 4)
                            Jun/16/2013 17:18:24: client6_send: send solicit to ff02::1:2%pppoe0
                            Jun/16/2013 17:18:24: dhcp6_reset_timer: reset a timer on pppoe0, state=SOLICIT, timeo=0, retrans=1079
                            Jun/16/2013 17:18:25: copy_option: set client ID (len 14)
                            Jun/16/2013 17:18:25: copyout_option: set identity association
                            Jun/16/2013 17:18:25: copy_option: set elapsed time (len 2)
                            Jun/16/2013 17:18:25: copy_option: set option request (len 4)
                            Jun/16/2013 17:18:25: client6_send: send solicit to ff02::1:2%pppoe0
                            Jun/16/2013 17:18:25: dhcp6_reset_timer: reset a timer on pppoe0, state=SOLICIT, timeo=1, retrans=2086
                            Jun/16/2013 17:18:27: copy_option: set client ID (len 14)
                            Jun/16/2013 17:18:27: copyout_option: set identity association
                            Jun/16/2013 17:18:27: copy_option: set elapsed time (len 2)
                            Jun/16/2013 17:18:27: copy_option: set option request (len 4)
                            Jun/16/2013 17:18:27: client6_send: send solicit to ff02::1:2%pppoe0
                            Jun/16/2013 17:18:27: dhcp6_reset_timer: reset a timer on pppoe0, state=SOLICIT, timeo=2, retrans=4252
                            Jun/16/2013 17:18:31: copy_option: set client ID (len 14)
                            Jun/16/2013 17:18:31: copyout_option: set identity association
                            Jun/16/2013 17:18:31: copy_option: set elapsed time (len 2)
                            Jun/16/2013 17:18:31: copy_option: set option request (len 4)
                            Jun/16/2013 17:18:31: client6_send: send solicit to ff02::1:2%pppoe0
                            Jun/16/2013 17:18:31: dhcp6_reset_timer: reset a timer on pppoe0, state=SOLICIT, timeo=3, retrans=8287
                            Jun/16/2013 17:18:40: copy_option: set client ID (len 14)
                            Jun/16/2013 17:18:40: copyout_option: set identity association
                            Jun/16/2013 17:18:40: copy_option: set elapsed time (len 2)
                            Jun/16/2013 17:18:40: copy_option: set option request (len 4)
                            Jun/16/2013 17:18:40: client6_send: send solicit to ff02::1:2%pppoe0
                            Jun/16/2013 17:18:40: dhcp6_reset_timer: reset a timer on pppoe0, state=SOLICIT, timeo=4, retrans=16283

                            1 Reply Last reply Reply Quote 0
                            • P
                              priller
                              last edited by

                              @ermal:

                              Can anybody confirm that when a renewal is not done either 2 dhcp6c processes are running or there is no default gw for v6?

                              At the time the 4 day lease expired, all IPv6 addressing went away.

                              There is no dhcp6c process running:

                              
$ ps -aux | grep dhcp6c
root   56506  0.0  0.0  9068  1512  ??  S    12:14PM   0:00.00 grep dhcp6c


                              
Jun 17 05:58:32 	dhcp6c[34138]: client6_timo: all information to be updated was canceled
Jun 17 05:55:08 	dhcp6c[34138]: client6_timo: all information to be updated was canceled

                              radvd is no longer running:

                              
Jun 13 05:50:51 	radvd[41186]: removing /var/run/radvd.pid
Jun 13 05:50:51 	radvd[41186]: sending stop adverts
Jun 13 05:50:51 	radvd[41186]: Exiting, sigterm or sigint received.
Jun 13 05:50:30 	radvd[40640]: IPv6 forwarding seems to be disabled, but continuing anyway.
Jun 13 05:50:30 	radvd[40640]: IPv6 forwarding setting is: 0, should be 1
Jun 13 05:50:30 	radvd[40640]: version 1.9.1 started
Jun 13 05:42:24 	radvd[53132]: resuming normal operation
Jun 13 05:42:24 	radvd[53132]: attempting to reread config file
Jun 13 05:42:05 	radvd[50732]: IPv6 forwarding seems to be disabled, but continuing anyway.
Jun 13 05:42:05 	radvd[50732]: IPv6 forwarding setting is: 0, should be 1
Jun 13 05:42:05 	radvd[50732]: version 1.9.1 started
Jun 13 05:34:06 	radvd[52561]: resuming normal operation
Jun 13 05:34:06 	radvd[52561]: attempting to reread config file
Jun 13 05:33:47 	radvd[52249]: IPv6 forwarding seems to be disabled, but continuing anyway.
Jun 13 05:33:47 	radvd[52249]: IPv6 forwarding setting is: 0, should be 1
Jun 13 05:33:47 	radvd[52249]: version 1.9.1 started

                              Gateway is there (same as when it was working):

                              
Internet6:
Destination                       Gateway                       Flags      Netif Expire
default                           fe80::201:5cff:fe24:9301%em1  UG          em1
::1                               ::1                           UH          lo0
fe80::%em0/64                     link#1                        U           em0
fe80::1:1%em0                     link#1                        UHS         lo0
fe80::%em1/64                     link#2                        U           em1
fe80::230:18ff:fea5:bdb8%em1      link#2                        UHS         lo0
                              1 Reply Last reply Reply Quote 0
                              • N
                                netkeys
                                last edited by

                                I haven't stayed on a version long enough to see what happens after 4 days.

                                But after every update I loose IPv6 connectivity.

                                I found that by going to "LAN interface" and disabling "IPv6" and clicking "save" then going to the "WAN interface" and disabling "IPv6" then clicking on Save then clicking "Apply changes" then turning "Ipv6" back on for the "WAN interface" as "DHCP6" and set "Prefix to 64" and clicking "save" then switching to the "LAN interface" and setting "IPv6 to Track Interface" and setting "interface to WAN" and clicking "save" then hitting "Apply changes" I can get IPv6 back without rebooting.  It's worked ever time since last Wednesday.  If I reboot then I loose connectivity and have to repeat the above procedure to get it back.

                                1 Reply Last reply Reply Quote 0
                                • johnpozJ
                                  johnpoz LAYER 8 Global Moderator
                                  last edited by

                                  Ok just did that on version

                                  2.1-RC0 (i386)
                                  built on Wed Jun 19 06:11:14 EDT 2013
                                  FreeBSD 8.3-RELEASE-p8

                                  And no ipv6 – I will give it a bit, and then try to reboot..  But I had a ipv6 while I was away for work..  Figured sweet, but when I got back looking today no ipv6..  So tried updating to the above, as of yet have not been able to get a ipv6

                                  Just going to have to go back to a tunnel from HE..  Since this is clearly NOT ready for primetime, I would just use m0n0wall but no openvpn support is not there..

                                  Can we please work on getting stable ipv6 where it comes up on its own and best yet maintain the IP range..

                                  An intelligent man is sometimes forced to be drunk to spend time with his fools
                                  If you get confused: Listen to the Music Play
                                  Please don't Chat/PM me for help, unless mod related
                                  SG-4860 24.03 | Lab VMs 2.7.2, 24.03

                                  1 Reply Last reply Reply Quote 0
                                  • P
                                    priller
                                    last edited by

                                    The problem has gotten progressively worse.  If it helps at all ….

                                    Prior to the May 9 build, at least you were able to get IPv6 addressing.  It would disappear when the lease expired (RENEW problem on bug #2919), but you could reboot and be back in service.

                                    Now, I can't get it to renew by rebooting .. as johnpoz noted.  I have to build fresh to get IPv6 working again.

                                    At this point, I need to move on until this gets resolved.

                                    1 Reply Last reply Reply Quote 0
                                    • johnpozJ
                                      johnpoz LAYER 8 Global Moderator
                                      last edited by

                                      I have just moved back to HE tunnel – this is just not working out..

                                      Guess will try the native stuff again when 2.1 is final with a new clean build, etc.  But for now I have also just moved on and went back to my stable HE tunnel..  Its got a bit of latency..  But it works!

                                      
C:\Windows\System32>ping ipv6.google.com

Pinging ipv6.l.google.com [2607:f8b0:4006:802::1012] with 32 bytes of data:
Reply from 2607:f8b0:4006:802::1012: time=60ms
Reply from 2607:f8b0:4006:802::1012: time=56ms
Reply from 2607:f8b0:4006:802::1012: time=58ms
Reply from 2607:f8b0:4006:802::1012: time=55ms

Ping statistics for 2607:f8b0:4006:802::1012:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 55ms, Maximum = 60ms, Average = 57ms

                                      An intelligent man is sometimes forced to be drunk to spend time with his fools
                                      If you get confused: Listen to the Music Play
                                      Please don't Chat/PM me for help, unless mod related
                                      SG-4860 24.03 | Lab VMs 2.7.2, 24.03

                                      1 Reply Last reply Reply Quote 0
                                      • N
                                        netkeys
                                        last edited by

                                        I just upgraded to the built on Fri Jun 21 15:17:41 EDT 2013 and for the first time it rebooted and IPv6 was working without any problems on Comcast.  I'll do some more testing in the morning.

                                        Seems to be heading in the right direction.

                                        Thanks

                                        1 Reply Last reply Reply Quote 0
                                        • S
                                          shavenne
                                          last edited by

                                          I think I don't see anything in the git commits that is related to this problem, but I will upgrade and test it too.

                                          1 Reply Last reply Reply Quote 0
                                          • N
                                            netkeys
                                            last edited by

                                            @netkeys:

                                            I just upgraded to the built on Fri Jun 21 15:17:41 EDT 2013 and for the first time it rebooted and IPv6 was working without any problems on Comcast.  I'll do some more testing in the morning.

                                            After future testing IPv6 kept connectivity after multiple reboots and after pulling plug on WAN 1 and letting router failover to backup U-Verse then returning to Wan1 Comcast connection.

                                            I haven't checked out get comments about changes but I haven't been able to get any of the previous versions to work after a reboot or failover test and the last 2 versions work as expected.

                                            I also installed the latest update built on Sat Jun 22 14:54:39 EDT 2013 and it came up after the reboots and after a failover test.

                                            I don't know if it will work for others but it's working well for me.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post