Weird (Firewall Rules) Problem

[albyva]

Here is the deal. I just installed v2.0.2 on my box and I'm able to access the box via the LAN port (192.168.1.1).
All is great and everything works like a charm when it comes to accessing the various drop downs to configure.
Specifically, the Firewall->Rules section.

Now when I go to change the LAN interface to 192.168.2.1/24 and log back in via the LAN, all other drop down
sections come up, except for Firewall -> Rules.  When I click on the Rules under Firewall all I get is an empty page
that appears to be attempting to load the gui you'd normally see. But for whatever reason, when I change the
LAN port away from 192.168.1.1/24 to 192.168.2.1/24, the Firewall->Rules section is no longer accessible.
And when I change it back to 192.168.1.1/24 and log back in, all is fine and I can see the firewall rules section.

What on earth could be going on?

-Alby

[podilarius]

That is strange. Try changing the LAN subnet and rebooting and see if you have the same problem.

[albyva]

@podilarius:

That is strange. Try changing the LAN subnet and rebooting and see if you have the same problem.

I did that and I got no love. Really weird. I'm gonna mess with it one last time this coming
weekend and see what is causing this issue.

Thanks for your response.

[albyva]

When I switch to using IE, it works. When I use Mozilla, it won't display anything under Firewall>Rules.

Weird…  Any ideas on what browser feature/flag might be the culprit?

[darnitol]

That is indeed odd - normally when I struggle with UI problems its because I'm using IE - switching to Firefox, Chrome, or Safari allows it to behave normally!

[cmb]

Sounds like the weird things that can happen with stale cache from previously accessing a different device on that same IP.

[albyva]

@cmb:

Sounds like the weird things that can happen with stale cache from previously accessing a different device on that same IP.

Good one. Let me clear out my browser's cache.  Thanks,