PfBlocker Lists question & Errors



  • All,

    I have been trying to find more details on what I need to do to setup lists in pfBlocker, but have not found anything.

    What is the best lists and best way to do the setup on them.

    Also, I am seeming to have issues with my pfBlocker too.

    On the dashboard I am showing Europe, NorthAmerica and Oceania with a read down arrow, but everything else is showing a green up arrow.     Is this a problem?

    There is a constant scrolling at the top saying the following:

    Acknowledge all

    [filter_load] There were error(s) loading the rules: /tmp/rules.debug:25:  cannot define table pfBlockerEurope:   Cannot allocate memory/tmp/rules.debug:27:  cannot define table pfBlockerNorthAmerica: Cannot allocate memorypfctl: Syntax error in config file: pf rules not loaded   The line in question reads [25]: table <pfblockereurope>persist file /var/db/aliastables/pfblockerEurope.txt

    It just keeps scrolling

    I have even uninstalled and restarted pfSense, then reinstalled pfBlocker, but get these same errors.

    What am I missing here?

    For each tab I have selected everything:

    Top Spammers - Deny Both
    Africa - Deny Both
    Asia - Deny Both
    Europe - Deny Inbound
    North America - Deny Inbound
    Oceania - Deny Inbound
    South America - Deny Both

    Nothing is setup for XMLRPC Sync

    Did I setup something wrong here?

    Thank you for your help.</pfblockereurope>



  • No one have a clue on what I am asking?

    Searching doesn't show the right thing, but then again I may not have the search correct.

    If anyone can point me in the right way, then hopefully I can finish this out  :)

    Thank you!



  • @rl2171:

    All,

    I have been trying to find more details on what I need to do to setup lists in pfBlocker, but have not found anything.

    What is the best lists and best way to do the setup on them.

    Rob,
    Marcello's lists are at:  http://e-sac.siteseguro.ws/pfBlocker/lists/

    Rick



  • @rl2171:

    There is a constant scrolling at the top saying the following:

    Acknowledge all

    [filter_load] There were error(s) loading the rules: /tmp/rules.debug:25:  cannot define table pfBlockerEurope:   Cannot allocate memory/tmp/rules.debug:27:  cannot define table pfBlockerNorthAmerica: Cannot allocate memorypfctl: Syntax error in config file: pf rules not loaded   The line in question reads [25]: table <pfblockereurope>persist file /var/db/aliastables/pfblockerEurope.txt

    It just keeps scrolling</pfblockereurope>

    Increase "Firewall Maximum Table Entries" on system-> advanced settings.

    You may need to disable pfblocker and click on Acknowledge all before increasing this system value.



  • So what does it mean on the dashboard I have pfBlocker show up

    In the status it shows a green up arrow and a red down arrow?

    I also see the packers for the red down arrow ones do not show anything where the ones with the green up arrows do show some packets.

    Thank you for the help

    Rob



  • @rl2171:

    So what does it mean on the dashboard I have pfBlocker show up

    In the status it shows a green up arrow and a red down arrow?

    arrow green, alias loaded and applied to rules.
    arrow red, alias not loaded or no rule assigned to that alias.



  • @marcelloc:

    @rl2171:

    So what does it mean on the dashboard I have pfBlocker show up

    In the status it shows a green up arrow and a red down arrow?

    arrow green, alias loaded and applied to rules.
    arrow red, alias not loaded or no rule assigned to that alias.

    Strange, if I do Deny inbound it shows red, but if I deny both it shows as green.

    I did not make any other changes to make the others green.



  • @rl2171:

    Strange, if I do Deny inbound it shows red, but if I deny both it shows as green.

    If you have no rules on wan interface, pfblocker will not create a rule as you already has an deny all traffic rule.


Log in to reply