My Network Card is continuse go down…..
-
My Pfsense Version is 2.1 beta -1 built on Mon Apr 29 20:54:19 EDT 2013 。
=========================================
May 15 14:33:58 pfleft check_reload_status: Linkup starting fxp0
May 15 14:33:58 pfleft kernel: fxp0: link state changed to UP
May 15 14:33:59 pfleft php: : DEVD Ethernet detached event for lan
May 15 14:34:01 pfleft php: : DEVD Ethernet attached event for lan
May 15 14:34:01 pfleft php: : HOTPLUG: Configuring interface lan
May 15 14:34:01 pfleft check_reload_status: Linkup starting fxp0
May 15 14:34:01 pfleft kernel: fxp0: link state changed to DOWN
May 15 14:34:03 pfleft check_reload_status: Linkup starting fxp0
May 15 14:34:03 pfleft kernel: fxp0: link state changed to UP
May 15 14:34:04 pfleft php: : DEVD Ethernet detached event for lan
May 15 14:34:06 pfleft php: : DEVD Ethernet attached event for lan
May 15 14:34:06 pfleft php: : HOTPLUG: Configuring interface lan
May 15 14:34:06 pfleft check_reload_status: Linkup starting fxp0
May 15 14:34:06 pfleft kernel: fxp0: link state changed to DOWN
May 15 14:34:08 pfleft check_reload_status: Linkup starting fxp0
May 15 14:34:08 pfleft kernel: fxp0: link state changed to UP
May 15 14:34:09 pfleft php: : DEVD Ethernet detached event for lan
May 15 14:34:11 pfleft php: : DEVD Ethernet attached event for lan
May 15 14:34:11 pfleft php: : HOTPLUG: Configuring interface lan
May 15 14:34:11 pfleft check_reload_status: Linkup starting fxp0
May 15 14:34:11 pfleft kernel: fxp0: link state changed to DOWN
May 15 14:34:13 pfleft check_reload_status: Linkup starting fxp0What happen about my pfsense ?
-
Can you try your NIC with em-drivers and test what happens?
-
I found some thing .. cpu loading is high …but ....this firewall have no one on line (just a testing router).....and there is no install any other packegs on this firewall ....
==========================
last pid: 36430; load averages: 1.59, 1.71, 1.67 up 0+01:35:40 21:32:58
108 processes: 3 running, 87 sleeping, 18 waitingMem: 77M Active, 13M Inact, 48M Wired, 224K Cache, 26M Buf, 838M Free
Swap: 2048M Total, 2048M FreePID USERNAME PRI NICE SIZE RES STATE TIME WCPU COMMAND
259 root 131 20 3352K 1176K RUN 65:50 66.06% check_reload_status
33519 root 76 20 82736K 29528K nanslp 0:01 56.79% php -
high CPU is a symptom of the link cycling, the root cause is the link cycling. Figure out why you're cycling link, what are you plugged into, is there a cabling issue, NIC issue, something else going on there.
-
I had a similar issue with some on-board fxp interfaces. I found manually setting them for 100/full-duplex made them stable. It's worth a shot.
-
I had a similar issue with some on-board fxp interfaces. I found manually setting them for 100/full-duplex made them stable. It's worth a shot.
ok , i will try it later..
but now , i turn off webConfigurator Protocol (https) , to use http at pfsense…
then the cpu loading is down....then the NIC is not going down anymore.....why ?
-
It's the opposite, the NIC isn't flapping, so the CPU usage goes down. It has nothing to do with whether you're using HTTP or HTTPS, that's a trivial difference in CPU.
-
@cmb:
It's the opposite, the NIC isn't flapping, so the CPU usage goes down. It has nothing to do with whether you're using HTTP or HTTPS, that's a trivial difference in CPU.
I really don't know.. but why the process```
and [check_reload_status] is continuse high loading....======================================
PID USERNAME PRI NICE SIZE RES STATE TIME WCPU COMMAND
259 root 131 20 3352K 1176K RUN 65:50 66.06% check_reload_status
33519 root 76 20 82736K 29528K nanslp 0:01 56.79% php -
@cmb:
It's the opposite, the NIC isn't flapping, so the CPU usage goes down. It has nothing to do with whether you're using HTTP or HTTPS, that's a trivial difference in CPU.
soory .. cmb
what resion would cause the NIC flapping ?
-
Figure out why you're cycling link, what are you plugged into, is there a cabling issue, NIC issue, something else going on there?
check_reload_status and PHP have to do many things when link status changes. When it changes non-stop they have to do a lot of things non-stop, using a lot of CPU in the process.
-
@cmb:
Figure out why you're cycling link, what are you plugged into, is there a cabling issue, NIC issue, something else going on there?
check_reload_status and PHP have to do many things when link status changes. When it changes non-stop they have to do a lot of things non-stop, using a lot of CPU in the process.
thanks a lot for cmb
I will try to find out the cycling link -
This is a driver issue.
Merge all posts from last 2 weeks and you will clearly see that:
a) Cables are OK
b) NICs are OK
c) Switches are OK
d) On some installs like mine there was no change other than pfsense snapshot update…Regards,
Greg -
This is a driver issue.
Merge all posts from last 2 weeks and you will clearly see that:
a) Cables are OK
b) NICs are OK
c) Switches are OK
d) On some installs like mine there was no change other than pfsense snapshot update…Regards,
GregThanks a lot fot Greg ….
last few days , I check the cables , NIC , Switches . It is really found nothing wrong . And the problem would happen at when I upgrape the kernel.
So , I think , It is driver issue , really !
Thanks~ -
I had the same problem off and on over this past week. I checked everything I could think of then I called my ISP, we ran a series of test and determined it was a bad NIC. I replaced the NIC and haven't had any problems since. Sometimes it's just a simple hardware problem.
http://www.speedtest.net/result/2687996289.png
-
Yes, but this is different case…
There are a lot of reports lately about FXP NICs and not all of them have bad hardware...
For bad HW I don`t need to call ISP, I can determine that by myself...