Unable to change dhcp range



  • Hi,

    I'm trying to change the DHCP range from 192.168.1.1/24 - 192.168.1.245 to 192.168.2.1/24 - 192.168.2.245 I made the change to Interface>Lan from 192.168.1.1 then before saving went back to dhcp range to change it then after saving. After it does the changes I'm unable to go online, not sure what went wrong there. I've confirmed release/renew but no luck still.

    using:  2.0.3-RELEASE (i386)



  • Did you try restarting pfSense? If you are getting dhcp addresses, is the dns, IP address, and gateway correct? If you statically set an interface does it work as expected?



  • After I've made the changes it auto restarted, and I've also restarted the machine but still no change. I've tried setting a pc to static to see if it'll work but no change at all though I'm receiving DHCP.



  • Do you have manual outbound NAT set? Are any rules set to the old IP address range still?



  • sweet that was the case! forgot completely about the outbound IP's after I changed it to the new ip it's all working! thanks!