[Package] siproxd



  • Have installed siproxd, and configured as follows:

    Inbound Interface: LAN
    Outbound Interface: WAN
    Listening Port: 5060

    Enable RTP Proxy: Enable
    RTP Port range (lower): 7070
    RTP Port range (upper): 7079
    RTP Stream Timeout: 300

    Expedited RTP Forwarding: yes
    Expedited SIP Forwarding: yes

    And added a rule on WAN to Pass requests From Any, Type TCP/UDP, Destination WAN Address, Destination Port Range 7070-7079.

    In system logs, i have the following:

    Jun 14 11:19:32 pfSense siproxd[18895]: siproxd.c:247 INFO:siproxd-0.8.0-5472 amd64-portbld-freebsd8.1 starting up
    Jun 14 11:19:32 pfSense siproxd[19166]: siproxd.c:295 INFO:daemonized, pid=19166
    Jun 14 11:19:32 pfSense siproxd[19166]: plugins.c:112 INFO:Plugin 'plugin_logcall' [Logs calls to syslog] loaded with success, exemask=0x40
    Jun 14 11:19:32 pfSense siproxd[19166]: sock.c:131 INFO:bound to port 5060
    Jun 14 11:19:32 pfSense siproxd[19166]: siproxd.c:349 INFO:siproxd-0.8.0-5472 amd64-portbld-freebsd8.1 started
    Jun 14 11:19:56 pfSense siproxd[19166]: utils.c:389 ERROR:Don't know what interface to look for - configuration error?
    Jun 14 11:19:56 pfSense siproxd[19166]: utils.c:389 ERROR:Don't know what interface to look for - configuration error?

    My phone is configured to use my pfsense internal IP as proxy, however it cannot register.
    Services > siproxd > registered phones does not list any phones.
    And when the phone attempts to register, I get more of these lines logged:

    Jun 14 11:29:02 pfSense siproxd[43337]: utils.c:389 ERROR:Don't know what interface to look for - configuration error?
    Jun 14 11:29:12 pfSense siproxd[43337]: utils.c:389 ERROR:Don't know what interface to look for - configuration error?
    Jun 14 11:29:32 pfSense siproxd[43337]: utils.c:389 ERROR:Don't know what interface to look for - configuration error?
    Jun 14 11:29:43 pfSense siproxd[43337]: utils.c:389 ERROR:Don't know what interface to look for - configuration error?


Log in to reply