Help with my setup

hardcore

I need help with my setup I have a internet fibre –---- cisco router does only nat ------esxi 5.0 with pfsense using squid, squidguard and lightsquid , domain which also does dhcp for 192.168.1.0 range and a file server and I want to make something like in the attachment to work
can someone help me how to configure a proxy server using this configuration ?

Dmz is not a physical machine just a network card on esxi machine and I need also dhcp to be done by the pfsense for dmz lan and also the proxy filtering

I am new to this

Please help me with thing like gateways , firewall rules suggestions , vlan configuration
![network configuration.jpg](/public/imported_attachments/1/network configuration.jpg)
![network configuration.jpg_thumb](/public/imported_attachments/1/network configuration.jpg_thumb)

podilarius

That configuration is certainly doable. There are many posts already to help you out if you where to look. My suggestion would be to test in a lab, could be ESX VM in a segragated vswitches, till you get the hang of it, then go for production. Biggest pointer I can give you right now is that if the cisco is only doing NAT, then that usually means it has a private address scheme. There is a setting in the WAN to block private IPs. You will need to turn that off.