IPSEC between Pfsense and Linksys RV042
-
is there anyone out there who can post an example of their settings,
i have tried various settings but can seem to make it work
i have static IP on both sites.
-
I have couple of these working fine –
Takes some patience to map the Linksys to the pfSense as names do not always translate well --
Which side do you need the help with --
=============================
-
sorry for the late reply, unfortunately i forgot to subscribe to the post and didnt get any update and thought no one replied.
So i basically have static IPs both sites,
and Ipscheme is
RV042 Site A 10.190.95.1
PfsenseSite B 10.190.9.1RV042 is connected directly to the internet while the pfsense box is behind a zyxell router.
Zyxell subnet is 10.190.85.1
pfsense WAN is 10.190.85.102zyxell is natting all 443 500 1994 to the pfsense box
i am not sure how to setup if you can post your working config i can probably copy them, hopefully you pfsense is also behind a router lol
-
@hongkonger:
i am not sure how to setup if you can post your working config i can probably copy them, hopefully you pfsense is also behind a router lol
NO I have the RV042 on one end DHCP from AT&T Uverse and pfSense on the other end Static Comcast.. An DNS Alias in the middle to resolve the IP for the RV042 end.
But my config will not help you with this, it's more important that you line up the values between the RV and pfSense.
–-------------