Dual WAN setup: 1-1 NAT only working on WAN and not on OPT1
-
Hi, I have a simple dual-WAN setup on pfsense 1.2b. I've read every tuturial, and can't seem to figure out what's going wrong.
I have mutliple WAN 1:1 NAT setup, and all the proper Virtual IP's setup (and they're associated correctly with WAN or OPT1 respectively)
LAN = 10.1.0.1
WAN = xxx.xxx.xxx.241 / 28 (block of 16 IP from ISP)
OPT1 - xxx.xxx.xxx.193 / 28 (block of 16 IP from ISP)I can add LAN rules that point traffic out each gateway, and they both do work, both interfaces are up.
I can add 1:1 NAT rules for any IP on the WAN they all work fine. Whatever machine on my LAN is assigned that external address from the WAN, it works great.
If I try to create a 1:1 NAT rule for any IP on the OPT1 , and create a virtual IP (assigning it to OPT1)… it doesn't work. And yes, I'm setting up the 1:1 NAT rules on the OPT1 if that external IP address is from OPT1
Any Ideas?
-
Please do not duplicate posts.