Sentinel keys server
-
hello someone please help me, i have my sentinel keys server and protection server installed on server in my networks LAN, which adress is 192.168.0.5, and i want access this server remotely, cause i use a application that need that key to validate, but it can't see the key. my pfsense is configuring on wan adress(ppoe) which adress 41.221.xx.xx and my lan adress is 192.168.0.20. i have no-ip install on pfsense to make acess remotely on my pfsense or other service. so a make configuration to open a sentinel keys server port (7001/7002) but it still see the key. but when a remove pfsense, and make configuration on my router open a dmz port to server 192.168.0.5, and i installed no-ip on this server (192.168.0.5) and i can see the sentinel keys server, and i can acess remotely. please someone could help me and sorry about my english. this is configuration on my pfsense on image.
-
Hi,
your Port Forwarding looks correct. Make sure you setup correct firewall rules for this Port Forward.
PS: When you create Port Forward on the bottom there is the possibility to create the correct firewall rules for this PortForward rule. This is the best way to get the correct firewall rules. Then make sure that the firewall rules the system created are on the top of the other WAN rules so that they will not be blocked.
If it does not work you can enable logging on that firewall rule(s) to see if traffic hits that rule or not.
PPS: Instead of creating to PortForwarding rules for port 7001 and 7002 you can create one rule with a Port range from 7001-7002. This makes it easier to debug.
-
thanks for help but i already doing this proceed, but i still see no lights i really don't known wha'ts is gone on, cause i test it without pfsense is working and make exact same rules on pfsense but i got no positive result, i when a try to see if this port is block on server, but it isn't cause i make telnet teste.no-ip.org:7001 is opened. check my image below.
-
A couple of things, I have no knowledge of sentinel key server but a quick bing.com search http://www.irricad.com/irricad/Download/Drivers/SysAdminHelp/WebHelp/What_is_Sentinel_Protection_Server_.htm shows that the server uses udp port 6001. Could this be your issue? Also while you are at work I recommend shieldsup which you can get from https://www.grc.com/x/ne.dll?bh0bkyd2 this will tell you if your firewall and computer are configured correctly.
-
thanks man you save the day, i really appreciate your help cause you make realize what's a really doing wrong, but now everything is great, communication conclude with success. i make exact you suggest i learn a lot about sentinel protection server, how it works so i open port 6001-6002 with few configuration on sentinel protection, bull eyes … one more time thanks you man ....
-
No Problem Glad I was able to help.