IPSec from mobile Client to IPsec Site2Site Connection
Pinuccio last edited by
I'm having the following problem:
Just connected Home-pfsense via VPN-Ipsec to Business-Lancom 1722 and the Tunnel works fine.
Here are the IP-Information for this Tunnel:
Now I have established a mobile IPSec-Connection in order to connect my iPad to the Home-Network:
In Order to route all the Internet-Traffic from the iPad via the VPN-Tunnel I have setup in the Phase2-Entry for the mobile-Connection the "Local Network-Entry" to "NONE"
This VPN-Connection works fine and alle the traffic is routed through my Home-Network.
Unfortunately I can not reach the Business-Network from the iPad which ist connected to the Lancom (10.1.0.0/16).
How can I realize that ?
I want to establish the VPN-Connection ipad <-> pfsense <-> Lancom and have the possibility to access the Lancom-Network from my iPad
Just tried to install pfsense 2.1 but still i can not find a way to make this work.
BTW: I don't think that the Lancom works with multiple Phase2-Entry…
jason0 last edited by
Hello, The lancom not allowing multiple phase 2 entries will probably be a problem for you. I believe there needs to be a pair of SA entries PER subnet. So the lancom would also need to know about your mobile network.
Of course, you MIGHT be able to use a larger cidr network…
- change the ipsec tunnel between the lancom and your pfsense box to be 192.168.16.0/23. <-- note the 23
- change your mobile network from 172.16.17.0/24 to 192.168.16.0/24
The 192.168.16.0/23 network is shorthand for