Limit Public IP
-
hello friends I give up, I'm trying something that seems simple but I found it somewhat complex, I limit the bandwidth of a public IP in both directions, explain my topology:
CISCO –-----WAN - PFSENSE - LAN with public IP routed ------- PC with public IP x.x.x.x
I need to limit the bandwidth in both directions, so far only get it down, but up is completely free
Any Help?
-
People will need abit more. They will need to see your configuration.
-
Ok, here are the images. In that rule'm limiting entire subnet
![PUBLICAS FIREWALL RULE.png](/public/imported_attachments/1/PUBLICAS FIREWALL RULE.png)
![PUBLICAS FIREWALL RULE.png_thumb](/public/imported_attachments/1/PUBLICAS FIREWALL RULE.png_thumb)
![PUBLICAS FIREWALL RULE1.png](/public/imported_attachments/1/PUBLICAS FIREWALL RULE1.png)
![PUBLICAS FIREWALL RULE1.png_thumb](/public/imported_attachments/1/PUBLICAS FIREWALL RULE1.png_thumb) -
Ok i made it with a floating rule, i'll post an image soon
-
Ok i'm here again, i made 2 rules, one to permit the traffic from the public ip to external network and another rule to permit the traffic from external network to public ip, but i can't inderstand why y have to select the WAN and the internal interface to make it work and the direction must be in always. If anyboddy want to explain.
![floating rules.jpg](/public/imported_attachments/1/floating rules.jpg)
![floating rules.jpg_thumb](/public/imported_attachments/1/floating rules.jpg_thumb) -
Is it working for you now?
-
It is working but i have these problem now, may be you could help me, http://forum.pfsense.org/index.php/topic,64573.0.html
-
Ok this is my scenario:
A WAN and a LAN with public IP routed accross PFSENSE, the routing work fine, but when i tried to limit bandwith with a limiter on WAN interface, the limiter does not work
-
I have tried to download a file from that server and the fastest speed I got is the one shown in the picture, does not increase, there is no congestion on the link, the link has 4 Mbit free, why the limiter does not work on the WAN?
I'm doing the download from another network that does not have congestion, I tried without the speed limiter and immediately increases to 400 KB / s
-
The limit only works with this floating rule, but happens I wrote in this post:
http://forum.pfsense.org/index.php/topic,64573.0.html
-
I found that if I set HONDUTEL as default gateway the limiter works on the WAN, what can it be?
-
What is described here is a known bug in pfsense, provide more detail here: https://redmine.pfsense.org/issues/3096