3. Squid3+Lightsquid–>500 – Internal Server Error-->Solved

Squid3+Lightsquid–>500 – Internal Server Error-->Solved

  • M

    My pfsense version is
    2.0.3-RELEASE (amd64)
    built on Fri Apr 12 10:27:15 EDT 2013
    FreeBSD 8.1-RELEASE-p13

    At first, I installed the squid 2.7.9 pkg v.4.3.3 and Lightsquid 1.8.2 pkg v.2.32.
    Then I open the Proxy report–>Lightsquid Report-->Graph Report, it's working fine.

    After that, I installed the squid 3.1.20 pkg 2.0.6.
    Then I open the Graph Report but it's not working, the error message is 500 – Internal Server Error.

    However, finally I got the solution of solving this problem.
    1:  cd /usr/local/www/lightsquid

    2: ./check-setup.pl
    LightSquid Config Checker, (c) 2005-9 Sergey Erokhin GNU GPL

    LogPath  : /var/squid/logs
    reportpath: /var/lightsquid/report
    Lang      : /usr/local/share/lightsquid/lang/eng
    Template  : /usr/local/www/lightsquid/tpl/base
    Ip2Name  : /usr/local/libexec/lightsquid/ip2name.ip

    no: GD.PM found, please install or set $graphreport=0 to disable

    3: ls -al /usr/bin/perl*
    lrwxr-xr-x  1 root  wheel  25 Jul 21 23:14 /usr/bin/perl -> /usr/local/bin/perl5.12.4
    lrwxr-xr-x  1 root  wheel  25 Jul 21 23:14 /usr/bin/perl5 -> /usr/local/bin/perl5.12.4

    4: ls -al /usr/local/bin/perl5*
    lrwxr-xr-x  1 root  wheel    25 Jul 21 23:14 /usr/local/bin/perl5 -> /usr/local/bin/perl5.12.4
    -rwxr-xr-x  2 root  wheel  7328 Jun 27  2012 /usr/local/bin/perl5.12.4
    -rwxr-xr-x  1 root  wheel  7424 Mar  6 23:18 /usr/local/bin/perl5.14.2

    5: unlink /usr/bin/perl

    6: unlink /usr/bin/perl5

    7: unlink /usr/local/bin/perl5

    8:  ./check-setup.pl
    ./check-setup.pl: Command not found.

    9:  ls -al /usr/bin/perl*
    ls: No match.

    10:  ls -al /usr/bin/perl5*
    ls: No match.

    11:  ls -al /usr/local/bin/perl5*
    -rwxr-xr-x  2 root  wheel  7328 Jun 27  2012 /usr/local/bin/perl5.12.4
    -rwxr-xr-x  1 root  wheel  7424 Mar  6 23:18 /usr/local/bin/perl5.14.2

    12: ln -s /usr/local/bin/perl5.14.2 /usr/bin/perl

    13: ln -s /usr/local/bin/perl5.14.2 /usr/bin/perl5

    14: ln -s /usr/local/bin/perl5.14.2 /usr/local/bin/perl5

    15: ls -al /usr/bin/perl*
    lrwxr-xr-x  1 root  wheel  25 Jul 21 23:25 /usr/bin/perl -> /usr/local/bin/perl5.14.2
    lrwxr-xr-x  1 root  wheel  25 Jul 21 23:25 /usr/bin/perl5 -> /usr/local/bin/perl5.14.2

    16: ls -al /usr/bin/perl5*
    lrwxr-xr-x  1 root  wheel  25 Jul 21 23:25 /usr/bin/perl5 -> /usr/local/bin/perl5.14.2

    17: ls -al /usr/local/bin/perl5*
    lrwxr-xr-x  1 root  wheel    25 Jul 21 23:25 /usr/local/bin/perl5 -> /usr/local/bin/perl5.14.2
    -rwxr-xr-x  2 root  wheel  7328 Jun 27  2012 /usr/local/bin/perl5.12.4
    -rwxr-xr-x  1 root  wheel  7424 Mar  6 23:18 /usr/local/bin/perl5.14.2

    18: ./check-setup.pl
    LightSquid Config Checker, (c) 2005-9 Sergey Erokhin GNU GPL

    LogPath  : /var/squid/logs
    reportpath: /var/lightsquid/report
    Lang      : /usr/local/share/lightsquid/lang/eng
    Template  : /usr/local/www/lightsquid/tpl/base
    Ip2Name  : /usr/local/libexec/lightsquid/ip2name.ip

    WARNING: $skipurl variable contain unescaped '.' char !!!
    WARNING: if you use . as regular expression metacharacter please use '' instead "" and escape . via .
    WARNING: $skipurl now ->zzz.zzz<

    all check passed, now try access to cgi part in browser

    If there is above message, you can see the Graph Report.

    0
  • F

    @meets21jp:

    My pfsense version is
    2.0.3-RELEASE (amd64)
    built on Fri Apr 12 10:27:15 EDT 2013
    FreeBSD 8.1-RELEASE-p13

    At first, I installed the squid 2.7.9 pkg v.4.3.3 and Lightsquid 1.8.2 pkg v.2.32.
    Then I open the Proxy report–>Lightsquid Report-->Graph Report, it's working fine.

    After that, I installed the squid 3.1.20 pkg 2.0.6.
    Then I open the Graph Report but it's not working, the error message is 500 – Internal Server Error.

    However, finally I got the solution of solving this problem.
    1:  cd /usr/local/www/lightsquid

    2: ./check-setup.pl
    LightSquid Config Checker, (c) 2005-9 Sergey Erokhin GNU GPL

    LogPath   : /var/squid/logs
    reportpath: /var/lightsquid/report
    Lang      : /usr/local/share/lightsquid/lang/eng
    Template  : /usr/local/www/lightsquid/tpl/base
    Ip2Name   : /usr/local/libexec/lightsquid/ip2name.ip

    no: GD.PM found, please install or set $graphreport=0 to disable

    3: ls -al /usr/bin/perl*
    lrwxr-xr-x  1 root  wheel  25 Jul 21 23:14 /usr/bin/perl -> /usr/local/bin/perl5.12.4
    lrwxr-xr-x  1 root  wheel  25 Jul 21 23:14 /usr/bin/perl5 -> /usr/local/bin/perl5.12.4

    4: ls -al /usr/local/bin/perl5*
    lrwxr-xr-x  1 root  wheel    25 Jul 21 23:14 /usr/local/bin/perl5 -> /usr/local/bin/perl5.12.4
    -rwxr-xr-x  2 root  wheel  7328 Jun 27  2012 /usr/local/bin/perl5.12.4
    -rwxr-xr-x  1 root  wheel  7424 Mar  6 23:18 /usr/local/bin/perl5.14.2

    5: unlink /usr/bin/perl

    6: unlink /usr/bin/perl5

    7: unlink /usr/local/bin/perl5

    8:  ./check-setup.pl
    ./check-setup.pl: Command not found.

    9:  ls -al /usr/bin/perl*
    ls: No match.

    10:  ls -al /usr/bin/perl5*
    ls: No match.

    11:  ls -al /usr/local/bin/perl5*
    -rwxr-xr-x  2 root  wheel  7328 Jun 27  2012 /usr/local/bin/perl5.12.4
    -rwxr-xr-x  1 root  wheel  7424 Mar  6 23:18 /usr/local/bin/perl5.14.2

    12: ln -s /usr/local/bin/perl5.14.2 /usr/bin/perl

    13: ln -s /usr/local/bin/perl5.14.2 /usr/bin/perl5

    14: ln -s /usr/local/bin/perl5.14.2 /usr/local/bin/perl5

    15: ls -al /usr/bin/perl*
    lrwxr-xr-x  1 root  wheel  25 Jul 21 23:25 /usr/bin/perl -> /usr/local/bin/perl5.14.2
    lrwxr-xr-x  1 root  wheel  25 Jul 21 23:25 /usr/bin/perl5 -> /usr/local/bin/perl5.14.2

    16: ls -al /usr/bin/perl5*
    lrwxr-xr-x  1 root  wheel  25 Jul 21 23:25 /usr/bin/perl5 -> /usr/local/bin/perl5.14.2

    17: ls -al /usr/local/bin/perl5*
    lrwxr-xr-x  1 root  wheel    25 Jul 21 23:25 /usr/local/bin/perl5 -> /usr/local/bin/perl5.14.2
    -rwxr-xr-x  2 root  wheel  7328 Jun 27  2012 /usr/local/bin/perl5.12.4
    -rwxr-xr-x  1 root  wheel  7424 Mar  6 23:18 /usr/local/bin/perl5.14.2

    18: ./check-setup.pl
    LightSquid Config Checker, (c) 2005-9 Sergey Erokhin GNU GPL

    LogPath   : /var/squid/logs
    reportpath: /var/lled lightingightsquid/report
    Lang      : /usr/local/share/lightsquid/lang/eng
    Template  : /usr/local/www/lightsquid/tpl/base
    Ip2Name   : /usr/local/libexec/lightsquid/ip2name.ip

    WARNING: $skipurl variable contain unescaped '.' char !!!
    WARNING: if you use . as regular expression metacharacter please use '' instead "" and escape . via .
    WARNING: $skipurl now ->zzz.zzz<

    all check passed, now try access to cgi part in browser

    If there is above message, you can see the Graph Report.

    Thanks for sharing information.. Internal server error is a big problem so thanks for sharing solution..

    0
Log in to reply
 

Products

Applications

Support

Services

News

Resources

Company

Our Mission

As host of the pfSense open source firewall project, Netgate believes in enhancing network connectivity that maintains both security and privacy. We also believe everyone should be able to afford it.

Subscribe to our Newsletter

Product information, software announcements, and special offers. See our newsletter archive for past announcements.

© Copyright 2002 - 2019 Rubicon Communications, LLC | Privacy Policy