RFC (make up a number not in use) - Blueprint for setting up snort + pfblocker
-
A little help with the snort configuration you suggested on the first page - just how much memory does it need? I threw 4GB at the setup thinking that would be plenty but whenever I try to enable one of the larger groups like ET-trojan.rules or ET-malware.rules, snort turns itself off for that interface.
Jun 9 16:29:21 check_reload_status: Syncing firewall Jun 9 16:29:21 php: /snort/snort_rulesets.php: [Snort] Updating rules configuration for: LAN ... Jun 9 16:29:23 php: /snort/snort_rulesets.php: [Snort] Enabling any flowbit-required rules for: LAN... Jun 9 16:29:23 php: /snort/snort_rulesets.php: [Snort] Building new sig-msg.map file for LAN... Jun 9 16:29:27 php: /snort/snort_interfaces.php: Toggle (snort starting) for LAN(LAN)... Jun 9 16:29:27 php: /snort/snort_interfaces.php: [Snort] Updating rules configuration for: WAN ... Jun 9 16:29:27 php: /snort/snort_interfaces.php: [Snort] Enabling any flowbit-required rules for: WAN... Jun 9 16:29:27 php: /snort/snort_interfaces.php: [Snort] Building new sig-msg.map file for WAN... Jun 9 16:29:27 php: /snort/snort_interfaces.php: [Snort] Updating rules configuration for: LAN ... Jun 9 16:29:29 php: /snort/snort_interfaces.php: [Snort] Enabling any flowbit-required rules for: LAN... Jun 9 16:29:29 php: /snort/snort_interfaces.php: [Snort] Building new sig-msg.map file for LAN... Jun 9 16:29:30 check_reload_status: Syncing firewall Jun 9 16:29:30 php: /snort/snort_interfaces.php: [Snort] Snort START for LAN(em1)...And that's the last line - no actual error, just snort no longer running on the interface. Is it memory? If not, what else is going on?
-
A little help with the snort configuration you suggested on the first page - just how much memory does it need? I threw 4GB at the setup thinking that would be plenty but whenever I try to enable one of the larger groups like ET-trojan.rules or ET-malware.rules, snort turns itself off for that interface.
Jun 9 16:29:21 check_reload_status: Syncing firewall Jun 9 16:29:21 php: /snort/snort_rulesets.php: [Snort] Updating rules configuration for: LAN ... Jun 9 16:29:23 php: /snort/snort_rulesets.php: [Snort] Enabling any flowbit-required rules for: LAN... Jun 9 16:29:23 php: /snort/snort_rulesets.php: [Snort] Building new sig-msg.map file for LAN... Jun 9 16:29:27 php: /snort/snort_interfaces.php: Toggle (snort starting) for LAN(LAN)... Jun 9 16:29:27 php: /snort/snort_interfaces.php: [Snort] Updating rules configuration for: WAN ... Jun 9 16:29:27 php: /snort/snort_interfaces.php: [Snort] Enabling any flowbit-required rules for: WAN... Jun 9 16:29:27 php: /snort/snort_interfaces.php: [Snort] Building new sig-msg.map file for WAN... Jun 9 16:29:27 php: /snort/snort_interfaces.php: [Snort] Updating rules configuration for: LAN ... Jun 9 16:29:29 php: /snort/snort_interfaces.php: [Snort] Enabling any flowbit-required rules for: LAN... Jun 9 16:29:29 php: /snort/snort_interfaces.php: [Snort] Building new sig-msg.map file for LAN... Jun 9 16:29:30 check_reload_status: Syncing firewall Jun 9 16:29:30 php: /snort/snort_interfaces.php: [Snort] Snort START for LAN(em1)...And that's the last line - no actual error, just snort no longer running on the interface. Is it memory? If not, what else is going on?
I found some posts via a Google search on the Snort mailing lists (or maybe it was Google Groups…) about the 2.9.6.0 version gobbling up memory fairly aggressively in higher traffic situations. This could also happen with lots of rules enabled. The ET-Trojan and ET-Malware rules groups are a bit large. There are settings for memory caps for the various preprocessors on the PREPROCESSORS tab. Adjusting those may help. It's also not outside the realm of possibility the Snort binary for this version (2.9.6.0) has a hidden bug. Signal 11 means a SEGFAULT occurred (or in less geeky terms, some piece of code tried to write to or access memory outside of its assigned address space). At least one other user had some "snort exited on signal 11" messages in their log during rule updates.
Bill
-
With regards to RAM usage, I've never seen snort go above 40% on a 2GB system.set up identical to this topic.
-
OK some more info here:
Using the Connectivity ruleset, 17% of 3051MB usage. And that's without most of the EmergingThreats rules.
Using the Security ruleset, 82%.I was amused to see this in my log one of the times it failed…
Jun 9 19:27:50 php: /snort/snort_interfaces.php: The command '/usr/local/bin/snort -R 60190 -D -q -l /var/log/snort/snort_em160190 --pid-path /var/run --nolock-pidfile -G 60190 -c /usr/pbi/snort-i386/etc/snort/snort_60190_em1/snort.conf -i em1' returned exit code '255', the output was 'Spawning daemon child... My daemon child 35849 lives... Daemon parent exiting (-1)'Is there some way to export the config file so you can have a look to see what I might have done wrong?
-
Let me take a wild guess that you are using AC. Use AC-BNFA.
EDIT: Actually AC-BNFA-NQ
-
Actually, AC-STD. However I seem to have solved it with the following process:
- Set the search method to AC-BNFA - this brought memory usage down to 10%
- Enable the desired rules - memory usage 13%
- Change search method back to AC-STD - memory usage 14%.
Voila!
-
And it will choke on the next rule update. Please use AC-BNFA-NQ. AC-BNFA-NQ replaced AC-BNFA, which in turn replaced AC*. Trust me, I was running AC-BNFA-NQ on multiple production networks, and I haven't created a black hole while doing so.
-
@jflsakfja:
And it will choke on the next rule update. Please use AC-BNFA-NQ. AC-BNFA-NQ replaced AC-BNFA, which in turn replaced AC*. Trust me, I was running AC-BNFA-NQ on multiple production networks, and I haven't created a black hole while doing so.
jflsakfja is correct. AC-BNFA-NQ is the best these days. Some of the other pattern matchers can gobble memory like crazy. And Suricata can be worse than Snort in this regard.
Bill
-
@jflsakfja:
And it will choke on the next rule update. Please use AC-BNFA-NQ. AC-BNFA-NQ replaced AC-BNFA, which in turn replaced AC*. Trust me, I was running AC-BNFA-NQ on multiple production networks, and I haven't created a black hole while doing so.
jflsakfja is correct. AC-BNFA-NQ is the best these days. Some of the other pattern matchers can gobble memory like crazy. And Suricata can be worse than Snort in this regard.
Bill
Not if you have a lot of RAM lol…
EDIT:
I have been using "AC" on a 32GB box and "AC-SPLIT" on all others.
I will try to see if changing the "AC-SPLIT" to "AC-BNFA-NQ" fixes the crashing at rule updates sometimes.
-
AC-BNFA-NQ.
AC-NQ is about 30% more ram efficient than AC-SPLIT, with an increased CPU usage.
AC (plain) is like killing a fly with a deathstar. AC-NQ replaced it, as in AC (plain) is now obsolete, you get no added benefits from AC over AC-NQ.
The best balance between RAM usage (more interfaces/more rules) and CPU is AC-BNFA-NQ. It's a single dropdown change, and an interface restart. Just try it, it will not bite.
On a side note, 32GB RAM is suricata's 10Gbps territory.
-
Not that I don't believe you, but Its hard to find some good docs on this.. Do you have any links?
-
If memory serves right, ac-bnfa-nq is the default if no method is specified. In order to be the default, it's probably the best, unless pushing snort to its limits, which unless you are in multiple-1Gbps territory, is nowhere near close to them.
A quick search gives this: http://sourceforge.net/p/snort/mailman/message/27113364/
A quick re-read of the entire thread will show that there are persons that think this topic is the absolute best way to set up snort on the entire internet. It might even give the hint to a certain group of people that want to build a statue of me, thinking I'm the messiah or something. A quick search around the forums will show others even going out of their way and lying that an i3 is faster than a p4 for a regular home connection while running snort.
If it meant completely tearing down your existing system and rebuilding it from scratch, then I understand the skepticism. As I said, it's a simple dropdown selection. Just try it, if you see that under your use case it chokes then try another method.
-
@jflsakfja:
A quick re-read of the entire thread will show that there are persons that think this topic is the absolute best way to set up snort on the entire internet. It might even give the hint to a certain group of people that want to build a statue of me, thinking I'm the messiah or something. A quick search around the forums will show others even going out of their way and lying that an i3 is faster than a p4 for a regular home connection while running snort.
I guess I am one of those people who sing your praise here… on my home system using your methodology and cookbook to get there, I cut my memory usage by more than half and CPU usage rarely comes off idle (AMD athlon 64 x2 with 4GB). I'm retired now but I spent enough years in the IT community (I was around before IT was IT) both as a worker bee and GOD that I can spot those who get it... vs. those who really understand it, live it, breathe it. I also learned not to argue with success until the next bright boy comes up with something better - and I've been on both sides of that coin. So yeah, I'd chip in a few coins towards your statue....BUT, considering you are still holding out on some of the rules that would be pretty helpful to us home users… we're talking "Winged Victory" here, not "David" (hint, one is missing their head) <wink>Rick</wink>
-
The upcoming suricata topic will include a long section dedicated to creating suricata rules specific to a network gateway. There is no need to release my custom rules, since it will be explained how to create those rules on your own.
If most of the stuff I've written so far is considered short by me, then you'll realize what long means when you see the topic ;)
I'm actually putting the finishing touches (writing entire paragraphs here and there) on the first part, the firewalling part right now.
-
@jflsakfja:
that want to build a statue of me, thinking I'm the messiah or something.
;D ;D ;D
-
Hello all, I tried Suricata, but it's not yet compatible with my system, so back again to Snort. Just a quick question that I can't seem to find the answer in the topic. What should we do with the rules that are disabled by default? In the Suricata guide I see that it's recommended to activate all first and then disable the unwanted rules. Should we take the same approach in snort?
I tried once this and Snort would not boot on the interface, probably some rule that should not be set on. I looked on the system log and no error. I uninstalled all and started from scratch.
Thank you
Best Regards -
Yes, the recommended way to set snort/suricata is to enable all then disable the rules suggested in the topics/list.
-
Thank you!
Any one had problems with rule "ET POLICY SSLv3 outbound connection from client vulnerable to POODLE attack
suppress" 1:2019416? I looked at both this tutorial and the suricata version, and both have this rule enabled! The problem is that if I leave this rule several google ip's are blocked, including play store and hangouts!Best regards
soloam -
The rule is valid, you just need to completely disable SSLv3 (and v2 and v1). See your browser's documentation on how to do it.
-
Sorry if I ask a silly question here, as I very new to SNORT.
I have been reading a lot, some I do understand but most I don't here.
Ok, here I begin the silly question ;D
Let take an example here, let's look the ET rules shown below:
emerging-botcc > all emerging-chat > all except: 2010784 ET CHAT Facebook Chat (send message) 2010785 ET CHAT Facebook Chat (buddy list) 2010786 ET CHAT Facebook Chat (settings) 2010819 ET CHAT Facebook Chat using XMPP 2002327 ET CHAT Google Talk (Jabber) Client Login 2002334 ET CHAT Google IM traffic Jabber client sign-on 2001241 ET CHAT MSN file transfer request 2001242 ET CHAT MSN file transfer accept 2001243 ET CHAT MSN file transfer reject 2001682 ET CHAT MSN IM Poll via HTTP 2002192 ET CHAT MSN status change 2008289 ET CHAT Possible MSN Messenger File Transfer 2009375 ET CHAT General MSN Chat Activity 2009376 ET CHAT MSN User-Agent Activity ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Question here is the exception rules that I need to disable, for example: 2010784 ET CHAT Facebook Chat (send message) For the above rule if I need to do the exception, I need search the Signature ID which shown above = 2010784, I need to a search on this rule and disable it As you know this is a PAINSTAKING task of finding each and every Signature ID 2009376, 2009375…...etc and disable each and every one. Question: 1) Is there a short-cut method of doing this mundane task faster? :( 2) This process of disabling each exception will start all over again since, whenever there a new updated Snort package is released, and if updated, then snort is completely unassigned to the WAN interface, and I have to manually reassign snort to run on my WAN interface, and hence I need to do the exception rules ALL over again, right? :( Thank you.
