Vlan on lagg doesnt# work

traxanos

we have have 4 network cards. we have group it by lagg mit mode fail over (later lacp). on lagg0 we have create different vlans. the clans interfaces are down, because parent interface are <none>.


lagg0_vlan504: flags=8803 <up,broadcast,simplex,multicast>metric 0 mtu 1500
	options=103 <rxcsum,txcsum,tso4>ether 00:00:00:00:00:00
	inet6 fe80::221:9bff:fefd:2449%lagg0_vlan504 prefixlen 64 scopeid 0xf
	inet 10.254.34.2 netmask 0xffffff00 broadcast 10.254.34.255
	nd6 options=1 <performnud>vlan: 0 vlanpcp: 0 parent interface: <none>lagg0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
	options=401bb <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,tso4,vlan_hwtso>ether 00:1b:21:9f:ca:f0
	inet6 fe80::21b:21ff:fe9f:caf0%lagg0 prefixlen 64 scopeid 0xb
	nd6 options=3 <performnud,accept_rtadv>media: Ethernet autoselect
	status: no carrier
	laggproto failover
	laggport: igb3 flags=0<>
	laggport: igb2 flags=0<>
	laggport: igb1 flags=0<>
	laggport: igb0 flags=1 <master></master></performnud,accept_rtadv></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,tso4,vlan_hwtso></up,broadcast,running,simplex,multicast></none></performnud></rxcsum,txcsum,tso4></up,broadcast,simplex,multicast>

any idea?</none>

jimp

I've seen lagg+vlan working on numerous customer configs on 2.0.x and 2.1.

What is the date on the 2.1 image you're running?

Did you just configure the VLANs?

Do they stay broken even after a reboot?

eri--

This does not seem good


status: no carrier

traxanos

at the moment it works. i didn't know if the update to the latest build does fix or the reboot of both firewalls.

it is possible that the problem exists if we change something on lagg and you need every time a reboot after such changes?

jimp

I've never seen that required for lagg in general. Unless it's a problem specific to the failover mode, it's not likely a general issue.
At least with LACP, which is the most common, it usually just works without any fuss.