[Solved] Public /25 Network with Virtual IP (other) and NAT

ahuser

Hi,

I have a /25 Public Network and want use this for my pfsense 2.1RC.
But I not want put 128 Virtual IP in the PfSense Firewall. I try it with Virtual IP type „other“ and select „netzwork“ /25.

Now i create an 1:1 nat rule with an ip adress from this range and i open an firewall rule. But this not working? Have i an error in reasoning?

Regards from Germany
Andreas

ahuser

Hi,

I have solved the problem! You must begin with the subnet addresses!

e.g. xxx.yyy.99.128/25

128 is my network subnet address
255 is my broadcast address
129 is the gateway
130 have i configured for the WAN2 Interface address 130/25

When I go to Virtual IP add „other” select dropdown „network“ and type xxx.yyy.99.131 /25 then only the first IP 131 work!
When I type xxx.yyy.99.128 /25 all works so if it should :-)

Regards Andreas