1:1 NAT Returns the wegbui of pfsense, but over the WAN access return device web
I configured 2 addresses "ip" as (ALIAS IP) for remote access two video conference services. Remote access over the WAN works perfectly but the internal network access to the public IP address does not return the web interface of video conference systems, it returns the web interface of pfsense. How can I solve this problem? Since I enabled NAT REFLECTION but the error persists.
I follow this tutorial:
Create a NAT rule on your internal interface with desired port, any source, destination of your virtual IP, and redirected IP of your internal server.
Didn't work …
The external IP address is already in a nat rule 1: 1 ...
The rule works for remote access, but for the local network to access the external ip address, is displayed the webgui interface of pfsense, this problem you wish to solve.
Thanks for the help.
Move your pfsense web gui off the port being used by that service.
For instance, if its on 443, move it to 7443 or if its on 80, move it to 8080 or 8180 or something. Turn off re-direct in pfsense also.
System: Advanced: WebGUI redirect
Basically, de-conflict your services with pfsense.
GruensFroeschli last edited by
To solve this more clean i would configure split DNS.
Consider taking a look at this page:
The third option is about solving this in an experimental way when 1:1 NAT is in use.