Adding bluetooth to pfSense
-
if you can show a reason that makes sense that might be used by more than yourself, say a decent portion of pfsense users - or bring in other users of the product because of this 'what for' it would be easier to get the feature request into the roadmap I would think.
Kinda doubt that. A technology that failed to get usable after 7 generations of the specification should finally be buried as deep as possible to avoid some nasty zombie incident.
-
if you can show a reason that makes sense that might be used by more than yourself, say a decent portion of pfsense users - or bring in other users of the product because of this 'what for' it would be easier to get the feature request into the roadmap I would think.
Kinda doubt that. A technology that failed to get usable after 7 generations of the specification should finally be buried as deep as possible to avoid some nasty zombie incident.
I use BT every day in my car to make calls, and several times a week for streaming audio with my Jambox. As a network transport though it's pretty poor. The throughput is slow even under ideal circumstances and the range doesn't extend much past the room you're in.
-
That's why I wanted to avoid the topic of 'what it's for' ;)
Now you're discussing what are the advantages/disadvantages/etc…No I'm not providing internet over bluetooth - I'm using WiFi for that.
I just need to have also bluetooth at our 'routers'. -
So, what Bluetooth profile does it need to support if you're not doing IP. Serial for console? Could be interesting for out of band access.
Steve
-
So, what Bluetooth profile does it need to support if you're not doing IP. Serial for console? Could be interesting for out of band access.
Steve
@Steve
Here are some parts from the company Eiko and the benefit of them are, that you don´t
need any drivers and/or Bluetooth stack inside of pfSense, so from the software side nothing
must be changed, I write this because in many cases peoples want to have inserted something
and because of their personal needs they don´t have look closer towards that this software is
then opening myn security wholes by side also.In some rarely cases it could be good to have a solution that is working, but without the hassle
of opening new security wholes for sure, sometimes firewalls are installed in 1" wall mounted
cabinets and no one wants to climb the ladder and mount the Serial cable and so this solution
is only a bluetooth > serial adapter that is replacing of the need to mount a serial cable, not
more but also not less. This action is not able to do over the normal USB ports!EIKON BLUEMORE500 UART
EIKON BLUEMORE600 UART
SKU-012-02 TTL-RS-232C Converter (5V)But soldering must be done by your self.
-
Why would a firewall need bluetooth?
In short and in general. The very thing Bluetooth was intended for. Wireless peripherals.
If my pfSense firewall had Bluetooth I would connect up my Bluetooth GPS receiver for time source.
Maybe a Bluetooth keyboard.
Oh hey, you know what. I have a couple Bluetooth USB dongles. Could I possible use those to connect up my Bluetooth GPS receiver to be the time source?
-
I suspect Bluetooth would be particularly badly suited for use in a time source situation. Pretty sure PPS would not pass, though I've never tried it. I probably would though if it did since I have Bluetooth GPS receivers gathering dust! ;)
Steve
-
No I'm not providing internet over bluetooth - I'm using WiFi for that.
I just need to have also bluetooth at our 'routers'.…and which bluetooth profiles do you need supported? Dare to talk about that at least?
-
I think (though my memory ain't what it was!) that he needed to connect to a phone sharing internet over Bluetooth. So it would require some IP over Bluetooth though it could have been seen as a modem requiring some ppp connection.
Too long ago now.Steve
-
I suspect Bluetooth would be particularly badly suited for use in a time source situation. Pretty sure PPS would not pass, though I've never tried it. I probably would though if it did since I have Bluetooth GPS receivers gathering dust! ;)
Steve
We'll what are you waiting for. Get to it and let me know. This is not a wheel I'm particularly suited to create. ;)