Fresh install cant access a site
-
fresh install to see if i could resolve this issue I cannot get to http://mailbeez.com/ response in browser is The server at mailbeez.com is taking too long to respond.
I have tried a lot of suggestions regarding similar issues posted throughout this thread but I can not figure this one out.
setup is basic just installed no rules nothing additional has been done.
I work for the ISP where I live as a service technician so I have 4 active modems in which i can connect directly to I can connect mailbeez.com. Also when hooked to a regular SOHO router linksys e4200 I can connect to that site.
I only have this issue when connected through my LAN–>pfsense-->WANI have been a user and donator since 2011 version 2.0 was released I always have been able to find my answers by going to this forum except for this issue has me confused.
Proto Source -> Router -> Destination State
tcp 176.9.124.20:80 <- 192.168.1.103:15714 CLOSED:SYN_SENT
tcp 192.168.1.103:15714 -> X.X.X.X:15468 -> 176.9.124.20:80 SYN_SENT:CLOSED
tcp 176.9.124.20:80 <- 192.168.1.103:15715 CLOSED:SYN_SENT
tcp 192.168.1.103:15715 -> X.X.X.X:52774 -> 176.9.124.20:80 SYN_SENT:CLOSEDThanks in advanced
Ray -
Weird. All other sites work for you?
-
Weird. All other sites work for you?
Yes sir no other site gives me this issue.
Its on all my nodes in my network (tablet, PC, Mac, Iphone, Laptop) when routed through pfsense. Other access links in my home they all can go to that site.
It keep thinking it has something to do with the fact that the server response when pinged even from outside my firewall on a different access link the response times are like so.
Approximate round trip times in milli-seconds:
Minimum = 134ms, Maximum = 137ms, Average = 135msBut then again I can access every other slow loading page I have encountered so don't know what makes this one different.
-
You are running a proxy server on pfsense right?
-
You are running a proxy server on pfsense right?
Nope just wiped the HD and did a fresh install configured DHCP on the LAN verified internet access and attempted to go to that web page and failed. No squid or other packages have been installed yet.
-
Weird - Seems like a DNS issue but its quite selective.
-
Weird - Seems like a DNS issue but its quite selective.
wouldn't going to the sites IP in a web browser negate a DNS issue if it yields the same results connection time out? http://176.9.124.20
-
No - Because when I go directly to the IP, it times me out but when I use the normal web name it doesn't.
I assume this is something to do with them maybe having a proxy in front of their site.
can you go to www.hulu.com ???
-
No - Because when I go directly to the IP, it times me out but when I use the normal web name it doesn't.
I assume this is something to do with them maybe having a proxy in front of their site.
can you go to www.hulu.com ???
yea www.hulu.com works fine loaded up fast
-
Very weird. What is the exact error you get when you try to browse the site?
-
Very weird. What is the exact error you get when you try to browse the site?
The connection has timed out
The server at www.mailbeez.com is taking too long to respond.
The site could be temporarily unavailable or too busy. Try again in a few
moments.
If you are unable to load any pages, check your computer's network
connection.
If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web. -
Are you running any country blockers or IP blockers or anything? No SNORT?
-
Go to your gui / Diagnostics/ DNS lookup
diag_dns.php
Enter mailbeez.com there and see what you get.
-
BTW - Just to be sure, www.mailbeez.com isn't your site is it?
-
Go to your gui / Diagnostics/ DNS lookup
diag_dns.php
Enter mailbeez.com there and see what you get.
DNS forwarder on same result
Server Query time
127.0.0.1 8 msec
8.8.8.8 30 msec
8.8.4.4 31 msecDNS forwarder off same result
Server Query time
8.8.8.8 50 msec
8.8.4.4 32 msecMY ISP DNS same results (holy cow latency)
Server Query time
65.32.1.65 256 msec
65.32.1.70 268 msec -
Are you running any country blockers or IP blockers or anything? No SNORT?
Fresh install LAN and wan default settings no packages yet
-
-
The route from you to them is probably broken somewhere along the way.
Lets see.run this command from linux terminal
mtr -c 25 –report -n mailbeez.com
(If you don't have linux handy, you can go to packages and install mtr-nox11, then go into the shell and run that command. Hopefully we will see where things are broken.)
Edit: You can also run that command from diagnostics > mtr in the pfsense web gui. (after you install the package)
then just drop in mailbeez.com in the top blank and 25 in the count blank then run and wait for results.
-
Go to your gui / Diagnostics/ DNS lookup
diag_dns.php
Enter mailbeez.com there and see what you get.
DNS forwarder on same result
Server Query time
127.0.0.1 8 msec
8.8.8.8 30 msec
8.8.4.4 31 msecDNS forwarder off same result
Server Query time
8.8.8.8 50 msec
8.8.4.4 32 msecMY ISP DNS same results (holy cow latency)
Server Query time
65.32.1.65 256 msec
65.32.1.70 268 msecWhat IP address did it give you?
Trivial I know but it all the clues…
-
The route from you to them is probably broken somewhere along the way.
Lets see.run this command from linux terminal
mtr -c 25 –report -n mailbeez.com
(If you don't have linux handy, you can go to packages and install mtr-nox11, then go into the shell and run that command. Hopefully we will see where things are broken.)
lol read my mind was running mtr as you edited that
I didn't want to physically move so I used winmtr
not to interesting results
|–----------------------------------------------------------------------------------------|
| WinMTR statistics |Host - % Sent Recv Best Avrg Wrst Last 192.168.1.1 - 0 26 26 0 0 0 0 No response from host - 100 6 0 0 0 0 0 71.44.1.106 - 0 26 26 7 9 16 8 72.31.211.158 - 0 26 26 11 17 25 13 72.31.2.146 - 0 26 26 12 18 26 20 72.31.208.2 - 0 26 26 9 14 20 17 4.68.70.149 - 0 26 26 8 12 47 12 4.69.148.213 - 0 26 26 124 128 135 127 4.69.151.254 - 0 26 26 127 131 137 129 4.69.140.142 - 0 26 26 125 128 137 125 4.69.148.253 - 0 26 26 125 128 134 126 4.69.132.86 - 0 26 26 127 129 137 127 4.69.134.134 - 0 26 26 128 131 141 129 4.69.134.149 - 0 26 26 124 131 143 131 4.69.137.61 - 0 26 26 127 131 137 130 4.69.143.137 - 0 26 26 124 127 133 129 4.69.140.6 - 0 26 26 124 128 141 125 4.69.154.75 - 0 26 26 130 133 173 132 195.16.162.254 - 0 26 26 129 133 154 129 213.239.245.25 - 0 26 26 131 133 141 131 213.239.245.30 - 0 26 26 133 135 141 133 213.239.245.90 - 5 22 21 0 136 146 136 213.239.244.51 - 0 26 26 136 138 144 139 176.9.124.20 - 0 26 26 134 136 145 138 ________________________________________________ ______ ______ ______ ______ ______ ______ However check this out I drew up a diagram real quick
it seems that when my staticly assigned IP is my GW connected to my pfsense box I cannot access the site. However with my PC connected direct to the modem with the same static IP and GW information it works fine.Just for the hell of it I threw in a residential modem with a publicly assigned dynamic IP from ISP and hooked that up to my pfsense box.... Guess what works fine
The mtr results on the residential modem with a publicly assigned dynamic IP
Same results more or less
|------------------------------------------------------------------------------------------|
| WinMTR statistics |Host - % Sent Recv Best Avrg Wrst Last 192.168.1.1 - 0 25 25 0 0 1 0 No response from host - 100 6 0 0 0 0 0 71.44.1.106 - 0 25 25 8 11 18 12 72.31.211.158 - 0 25 25 10 17 25 13 72.31.210.239 - 0 25 25 12 19 29 15 72.31.208.2 - 0 25 25 13 18 26 18 4.68.70.149 - 5 22 21 0 12 25 12 4.69.148.213 - 0 25 25 129 132 137 133 4.69.151.254 - 0 25 25 129 134 145 131 4.69.140.142 - 0 25 25 131 135 145 143 4.69.148.253 - 0 25 25 126 129 136 129 4.69.132.86 - 0 25 25 129 132 138 129 4.69.134.138 - 0 25 25 128 132 142 139 4.69.134.153 - 0 25 25 127 131 139 133 4.69.137.53 - 0 25 25 130 132 138 134 4.69.143.141 - 0 25 25 129 132 137 131 4.69.140.14 - 0 25 25 130 133 143 134 4.69.154.203 - 0 25 25 126 129 134 129 195.16.162.254 - 0 25 25 136 142 174 137 213.239.245.25 - 5 22 21 0 135 139 133 213.239.245.30 - 0 25 25 138 141 150 139 213.239.245.90 - 0 25 25 139 142 149 144 213.239.244.19 - 4 25 24 136 140 152 144 176.9.124.20 - 0 25 25 135 138 144 140 ________________________________________________ ______ ______ ______ ______ ______ ______ diagram attached does not have the PC connected to the modem and the firewall with the same static I drew that to show that it works direct to modem with IP in NIC and same IP in pfsense wouldnt let me go to that one damn site.