Multiple Wan networks on same interface
-
Hi All,
I have two separate /27 networks that are provided to us by virgin media. There is a Cisco router in front of our PFsense firewall that controls failover between two lines. We get presented both of these networks through one network cable on the same VLan.
I cant seem to add a Carped IP in the second network with an error saying its not in the first range. I have tried adding the second range to the same interface but it complains about it already being used.
How would I go about adding these IP's to the same interface?
-
Is this not possible or am i going about this the wrong way?
-
So you want to remove the Cisco and hook up both subnets directly to pfSense?
-
No the cisco kit is not owned by us and it does failover between our primary line and a backup one so we cant remove it.
We are only presented one cable that has both subnets using the same vlan.
-
From what you describe i'd use an "Alias" type virtual IP.
-
thanks GruensFroeschl
Does a IP Alias fail between two pfsense boxes like a carped address would do, or would I have to add the network as an IP Alias and then single carped addresses for each of the IP addresses?
