IPv6 WAN and LAN on VMware ESXI 5.5



  • Hi All,

    I'm a bit of an IPv6 noob so let me apologise first.

    I currently have a VMware Esxi server setup as follows;

    I have a real network interface which is the WAN and a Virtual interface which is the LAN.

    Currently on IPv4 I use NAT for the VM's which connect to the LAN interface.

    These work fine.

    I am now looking to implement IPv6 to my setup.

    I have a /64 range configured on the router to which my server is connected on, the gateway for this is: 2A02:xxxx:xxxx::1

    I then have the WAN interface in Pfsense configured with 2A02:xxxx:xxxx::2

    Both of these are pingable.

    However I cannot work out how to add IPv6 address' to each of my VM's within the LAN interface. I have configured a Windows 2012 server with 2A02:xxxx:xxxx::3 but I can't work out how to pass this through to the WAN on Pfsense.

    Thanks for your help.


Log in to reply