PFsense with Snort in Bridge mode Failed LOIC pentest
-
I have installed Pfsense 2.1 with snort as bridge firewall.
I tried pentesting using LOIC to tcp port 443 with 10000 threads.
I used 2 computers, 1 is for pentest and the other just to monitor by pinging pfsense continuously from another vlan on the WAN side.
When I started the pentest, the monitoring computer showed time out in ping and I can't open also the webgui of the pfsense from the monitoring computer. I stopped the pentest, I checked snort alert/blocked and it is detecting and blocking the IP of the computer that I'm using to pentest.
But even if the IP of the pentest computer is already blocked, if i restart the pentest, ping and webgui access to pfsense from monitoring computer is lost again. it seems that pfsense is hanging on DoS attack.
I appreciate if you can give me a work-around on this if you have encountered and solved this before.
Thank you
-
Snort in a bridge can't assign proper IP addresses the network variables.
Solution:http://forum.pfsense.org/index.php/topic,65858.msg358457.html#msg358457
-
@jflsakfja:
Snort in a bridge can't assign proper IP addresses to the network variables.
Solution:http://forum.pfsense.org/index.php/topic,65858.msg358457.html#msg358457