Navigation

    Netgate Discussion Forum
    • Register
    • Login
    • Search
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search

    Inter vlan routing will not work for me :(

    Routing and Multi WAN
    3
    3
    1238
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • D
      Deval last edited by

      Hi guys

      Pfsense 2.1  single interface with

      Vlan 10 192.168.1.254/24
      Vlan 20 192.168.2.254/24
      Vlan 30 192.168.3.254/24

      Multi wan setup (on separate interfaces)
      Nat is set to manual (tried changing to auto)
      Firewall rule allow everything anywhere

      Pfsense can ping vlan 1 and 2

      Cannot route between vlans

      Packet capture shows icmp enters pfsense but doesn't exit

      Tried everything I can think of

      1 Reply Last reply Reply Quote 0
      • G
        galaxy60 last edited by

        Can you confirm on each VLAN you have a firewall rule allowing all traffic out?

        1 Reply Last reply Reply Quote 0
        • Derelict
          Derelict LAYER 8 Netgate last edited by

          @galaxy60:

          Can you confirm on each VLAN you have a firewall rule allowing all traffic out?

          pfSense interface firewall rules work on traffic INTO the interface.  It doesn't matter whether it's another LAN (or VLAN) or the WAN.

          Keep in mind that the default pass any any rules are not automatically generated for any interfaces other than LAN, so you probably need to create them.

          Chattanooga, Tennessee, USA
          The pfSense Book is free of charge!
          DO NOT set a source port in a port forward or firewall rule unless you KNOW you need it!
          Do Not Chat For Help! NO_WAN_EGRESS(TM)

          1 Reply Last reply Reply Quote 0
          • First post
            Last post