PfSense as a transparent firewall

[crach]

Hi all,

I've build the following structure:

 |---------|
 |   WAN   |
 |---------|
      | WAN-IP/24
      |
      |
 |---------|
 | Switch  |
 |---------|
      |
      |
      | bge0 (VLAN 50)
 |---------|
 | pfSense |-------- xl0 (Mgmt-LAN)
 |---------|
      | bge1 (VLAN 600)
      |
      |
 |---------|
 | Switch  |
 |---------|
      |
      |
      | eth0 (VLAN 600)
|-----------|
|    PC     |
| WAN-IP-1  |
|-----------|

I've assigned 3 interfaces:

• WAN - VLAN 50 on bge0

• LAN - VLAN 600 on bge1

• Mgmt - xl0

Then I created a bridge (and if) between WAN and LAN.
All interfaces with config-type "None" and a firewall-rule "Any 2 Any"

Finally I assigned a WAN-IP-Address to my computer and try to become an answer from the gateway (on the WAN side) - without any success.

Do anyone have any idea; what's wrong?

Many thanks in advance
Best Regards
craCH

[crach]

No idea?

[Cedus]

System tuneables correct set and NAT fully disabled? Is the pfSense machine real or virtual?