Loading config killed

  • Hi,

    We have a customer running pfsense on an Soekris box. It has about 30 vlans configured. When rebooting it appears that the process that loads the configuration is being killed. During loading the interfaces after a couple of minutes it just comes up with the word killed, stops loading the interface configuration and continues booting. I assume there is some timeout that if the process takes too long then it is killed. When it boots it is missing half of the interfaces configuration. i.e. the vlan exists but is missing it's IP.

    Running /etc/rc.reload_all start when it has booted takes about 5 minutes and solves the problem however we would like to get it resolved so that if it looses power it comes back up.

    2.1-RELEASE (i386)
    built on Wed Sep 11 18:16:50 EDT 2013
    FreeBSD fw1.cbc.local 8.3-RELEASE-p11 FreeBSD 8.3-RELEASE-p11 #1: Wed Sep 11 18:48:37 EDT 2013 root@snapshots-8_3-i386.builders.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_wrap.8.i386 i386


  • Rebel Alliance Developer Netgate

    How old is the Soekris device? How much RAM does it have?

Log in to reply