OpenVPN and Layer 2 Bridge with user VPNs not working well.
I am fairly new to OpenVPN on pfSense.
I have 2 pfSense FWs running 2.1 RELEASE
Site 1 has a GW of 192.168.20.1 and an external WAN IP with an openVPN server running in tap mode
Site 2 has a GW of 192.168.20.2 and an external WAM IP with an openVPN client running in tap mode.
I can ping from site 1 to site 2 and everything works great.
I then also have a second openVPN server running at Site 1 in tun mode. users get 192.168.21.0/24 address when connected.
After making a connection users can see everything at site 1, but can't get to site 2.
I am sure there is a rule I need to add somewhere to make this work, but for the life of me I can't figure out how to get users VPNed into site 1 access to machines on the site 2 side. Any help?
I guess machines at site 2 have GW set to 192.168.20.2 - and 192.168.20.2 has no route to VPN tunnel 192.168.21.0/24
Maybe just add a static route on 192.168.20.2 to route 192.168.21.0/24 to 192.168.20.1?
and there might be an asymmetric routing issue come up because traffic in 1 direction only will go through 192.168.20.2